Netgear DGND3700 ユーザーガイド

ページ / 185
Advanced Settings
126
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 
8. 
If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can 
select the Use Wildcards check box to activate this feature. For example, the wildcard 
feature causes *.yourhost.dyndns.org to be aliased to the same IP address as 
yourhost.dyndns.org.
9. 
Click Apply to save your settings.
Note:  
If your ISP assigns a private WAN IP address such as 192.168.x.x 
or 10.x.x.x, the Dynamic DNS service will not work because private 
addresses are not routed on the Internet.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing 
Information Protocol (RIP). The wireless modem router is shipped preconfigured to use 
private IP addresses on the LAN side and to act as a DHCP server. The wireless modem 
router’s default LAN IP configuration is as follows:
•     
LAN IP address. 192.168.0.1
•     
Subnet mask. 255.255.255.0
These addresses are part of the private address range designated by the Internet 
Engineering Task Force (IETF 
http://www.ietf.org/
) for use in private networks, and should be 
suitable in most applications. If your network has a requirement to use a different IP 
addressing scheme, you can make those changes in the LAN IP Setup screen.
Note:  
If you change the LAN IP address of the wireless modem router 
while connected through the browser, you are disconnected. To 
reconnect, open a new connection to the new IP address and log in.