Netgear DGND3700 ユーザーガイド
NETGEAR VPN Configuration
168
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Step 1: Configure Gateway A (VPN Router at Main Office)
To configure a VPN tunnel:
1.
Log in to the VPN router. Select VPN Policies to display the VPN Policies screen. Click
Add Auto Policy to proceed and enter the information.
Add Auto Policy to proceed and enter the information.
toGW_A.com (in this example)
fromGW_A.com (in this example)
fromGW_A (in the example)
192.168.2.3 (in this example)
IKE Keep Alive is optional; has to match
Remote LAN IP Address when enabled
(remote PC must respond to pings)
Remote LAN IP Address when enabled
(remote PC must respond to pings)
(Remote NAT router has to have
Address Reservation set and
VPN Passthrough enabled)
Address Reservation set and
VPN Passthrough enabled)
2.
Click Apply when you are finished to display the VPN Policies screen.
To view or modify the tunnel settings, select the radio button next to the tunnel entry, and then
click Edit.
click Edit.