Netopia 2e-w ユーザーガイド
Cayman 2E-W User’s Guide
Configuring Your Cayman 2E-W
November 2000
3-19
6.
If you chose
for DHCP leases in the
Lease Time field.
Enter the lease duration in day:hour:minute:second
(DD:HH:MM:SS) format.
(DD:HH:MM:SS) format.
7.
If you chose
Relay-agent in Step 3, specify the IP address
the remote DHCP server to which your Cayman 2E-W will
relay Dynamic Host Control Protocol address requests in
the
relay Dynamic Host Control Protocol address requests in
the
Server Address field.
8.
Click the
Save button to store your modified
configuration in the Cayman 2E-W memory.
9.
Click the
Restart Cayman-2E button on the Cayman 2E-W
Home Page to restart your Cayman 2E-W with its new
configuration.
configuration.
Entering WAN
(Ethernet B)
Settings
(Ethernet B)
Settings
The Ethernet Port B (WAN) Configuration window lets you enter
TCP/IP configuration information for the WAN (Ethernet B) port on
your Cayman 2E-W. The appearance of the Ethernet B window
depends on whether you have turned on PPP over Ethernet on the
port.
TCP/IP configuration information for the WAN (Ethernet B) port on
your Cayman 2E-W. The appearance of the Ethernet B window
depends on whether you have turned on PPP over Ethernet on the
port.
The Cayman 2E-W is configured at the factory to determine the
correct configuration for its WAN port automatically. You will only
configure this information if the Cayman 2E-W cannot determine its
Ethernet Port B configuration information from a DHCP server on
your wide area network.
correct configuration for its WAN port automatically. You will only
configure this information if the Cayman 2E-W cannot determine its
Ethernet Port B configuration information from a DHCP server on
your wide area network.
PPPoE is Off
To display the Ethernet Port B (WAN) Configuration window (Figure
3-8), click the
3-8), click the
Ethernet B (WAN) button on the Cayman 2E-W Home
Page.