Mitsubishi cp9000dw 操作ガイド

Cleaning as indicated below will help maintain stable printer operation and extend the printer’s life.

Alcohol (isopropyl alcohol)

Tissue paper (Fold in half about four times, and use the folded side to clean.)

Other : Cleaner pen (option)*, Cleaning ribbon (option)*

* Please ask the dealer about options.

How to fold tissue paper

Cleaner pen

Cleaning part

A small amount of alcohol

Cleaning part of thermal head

Outside

Inside

Cleaning part

1

1

1

1

1

2

2

2

2

2

3

3

3

3

3

4

4

4

4

4

5

5

5

5

5

Make sure to turn off the power before cleaning.

Clean the heat-generating part below the thermal head.

Wipe the head cleaning part carefully with tissue paper dampened with a small amount of

alcohol.

•

Do not damage the thermal head.

•

The thermal head is hot right after printing.  Wait until the head temperature drops low

before cleaning the thermal head.

2

2

2

2

2

When you use print paper of 152 mm (6”) with after using that of 127 mm (5”), thermal

head cleaning with a cleaning ribbon may be required.

If one or two lines appear on the printing surface as shown right when printing on the print

paper of 152 mm (6”) width, clean the thermal head using the optional cleaning ribbon.

Cleaning is not required when :

you use print paper of 127 mm (5”) width after using that of 127 mm(5”),

you use print paper of 152 mm (6”) width after using that of 152 mm(6”), or

you use print paper of 127 mm (5”) width after using that of 152 mm(6”).

Print paper of 127 mm(5”) width :

9x13 (3.5x5”)

Print paper of 152 mm (6”) width : 10x15 (4x6”)

When the symptom of poor print quality is not corrected even after the head is cleaned,

replace the thermal head.  Contact your dealer.

Clean the parts that contact the print paper sides as shown right.
Wipe the parts carefully with tissue paper dampened with a small amount of alcohol.

Printing

surface

about 12 mm

about 12 mm

Cleaning ribbon

(CR9000)

lines

152 mm