Mitsubishi pd-5030 ユーザーズマニュアル
10
Note:
1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.
1. The VIDEO1 and RGB1 terminals can be used for either INPUT or OUTPUT.
When LOOP OUT is ON, do not connect an OUTPUT signal from another unit, that will place an extraordinary load on
the other unit and may damage it.
the other unit and may damage it.
2. LOOP OUT can not be turned ON while signals are input to RGB1 terminal.
3. LOOP OUT can be turned ON while signals are input to RGB1 terminal if the POWER is switched ON.
3. LOOP OUT can be turned ON while signals are input to RGB1 terminal if the POWER is switched ON.
Information
• To loop signals out to another plasma display, set the LOOP OUT to ON.
• To connect monitors, please use a 1~2m (3.3~6.6 feet) BNC cable (any commercially available cable).
• If the image quality is poor, do not use the monitor’s out terminal. Use a distribution amplifier (any commercially
• To loop signals out to another plasma display, set the LOOP OUT to ON.
• To connect monitors, please use a 1~2m (3.3~6.6 feet) BNC cable (any commercially available cable).
• If the image quality is poor, do not use the monitor’s out terminal. Use a distribution amplifier (any commercially
available distribution amplifier) to connect the split signals to the respective monitor INPUT terminals.
Loop Out
Cable Management
Using the cable clamps provided with the plasma display,
bundle at the back of the unit the signal and audio cables
connected to the display.
bundle at the back of the unit the signal and audio cables
connected to the display.
Back of the unit
mounting hooks/mounting holes
To attach
To detach
clamp
mounting hole
cables
1.
2.
VIDEO
(I
N
/OUT
)
VIDEO
1
VIDEO
2
VIDEO
3
AUDIO
1
DVD
1
R
(MONO
)
L
Y
IN
OUT
REMOTE
BNC connector
RCA phono plug
OUT
VIDEO Signal
IN
IN
OUT
Remote
control
control
VIDEO Signal
Remote
control
control
RGB
2
/
DVD
2
/
HD
2
2
RGB
1
R/
VD
G/
B
/
HD
(I
N
/OUT
)
Cr/Pr
Y
Cb/Pb
IN
OUT
REMOTE
BNC connector
RGB signal/
DVD/HD signal
DVD/HD signal
IN
OUT
IN
OUT
Remote
control
control
RGB signal/
DVD/HD signal
DVD/HD signal
Remote
control
control
• Connect signal cables and remote cables as shown below.
Video signal
Video signal
RGB/DVD/HD signal