Mitsubishi pd-5030 ユーザーズマニュアル
14
Information
Supported resolution
See page 40 for details on the display output of the
various VESA signal standards supported by the
monitor.
See page 40 for details on the display output of the
various VESA signal standards supported by the
monitor.
When 852 (848) dot 480 line wide VGA*
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
Select an appropriate setting for RGB SELECT
mode referring to the“Table of Signals Supported”
on page 40.
* “VGA”, “SVGA” and “SXGA” are registered
mode referring to the“Table of Signals Supported”
on page 40.
* “VGA”, “SVGA” and “SXGA” are registered
trademarks of IBM, Inc. of the United States.
WARNING
DO NOT OPERATE THE PLASMA DISPLAY IN NARROW
(4:3) SCREEN SIZE MODE FOR AN EXTENDED
PERIOD. THIS CAN CAUSE PHOSPHOR BURN-IN.
(4:3) SCREEN SIZE MODE FOR AN EXTENDED
PERIOD. THIS CAN CAUSE PHOSPHOR BURN-IN.
Format Operation with Computer
Signals
Signals
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
1. Press the FORMAT button on the remote control.
2. Within 3 seconds ...
to fill the entire screen.
1. Press the FORMAT button on the remote control.
2. Within 3 seconds ...
Press the FORMAT button again.
The screen size switches as follows:
The screen size switches as follows:
→ NARROW → STANDARD → EXPAND
NARROW screen size (4:3 or SXGA 5:4)
The picture has the same size as the normal computer
image.
image.
STANDARD screen size
The image is expanded in the horizontal direction.
EXPAND screen size
When wide signals are input.
STANDARD screen size