Mitsubishi pd-5030 ユーザーズマニュアル

32

LAST .......................... Last mode (the mode that was

last selected at the time the
power was switched off).

VIDEO1, 2, 3 ............. VIDEO input mode.
RGB1, 2, MONLINK .. RGB input mode.
HD/DVD1, 2 ............... HD/DVD input mode.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

This function enables/disables the front panel controls.
Example: Setting “ON”

1. On the MAIN MENU, select “OPTION3”, then press

the MENU/ENTER button.
The “OPTION3” screen appears.

2. Use the 

▲ and ▼ buttons to select “BUTTON  LOCK”.

3. To set the BUTTON LOCK to “ON”...

Use the 

 and 

 buttons to select “ON”, then press the

MENU/ENTER button.
The mode switches as follows each time the 

 or 

button is pressed:

OFF  ↔   ON

 BUTTON LOCK settings
ON ...... Disables the buttons on the front panel.
OFF .... Enables the buttons on the front panel.
* Even when the BUTTON LOCK is set, the POWER

switch will not be locked.

* This becomes effective when the on-screen menu goes

out.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

This function enables/disables remote control wireless
transmission.
Example: Setting “OFF”

1. On the MAIN MENU, select “OPTION3”, then press

the MENU/ENTER button.
The “OPTION3” screen appears.

2. Use the 

▲ and ▼ buttons to select “IR REMOTE”.

3. To set the IR REMOTE to “OFF”...

Use the 

 and 

 buttons to select “OFF”, then press

the MENU/ENTER button.
The mode switches as follows each time the 

 or 

button is pressed:

OFF  ↔   ON

 IR REMOTE settings
ON ...... Enables remote control wireless transmission.
OFF .... Disables remote control wireless transmission.

Set “OFF” to avoid unwanted control from
other remote controls.

 Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.