ADC 702g2 仕様ガイド
Megabit Modem 702G2
High Performance 2 or 4 Wire Rate Adaptive G.SHDSL Bridge and Router
The G.SHDSL MM702G2 provides an affordable, high performance, 4.6 Mbps connection over
copper to support LAN-to-LAN or LAN-to-WAN solutions. The new 4 wire G.SHDSL megabit
modem increases reach by up to 30 percent.
copper to support LAN-to-LAN or LAN-to-WAN solutions. The new 4 wire G.SHDSL megabit
modem increases reach by up to 30 percent.
The latest addition to ADC’s family of DSL-based customer premise equipment, the MM702G2,
is the ideal solution for small to medium-sized businesses and branch offices looking for cost-
effective Ethernet connectivity. This versatile G.SHDSL-based product can be used back-to-back
for LAN extension applications or as an access modem to connect to DSLAMS.
is the ideal solution for small to medium-sized businesses and branch offices looking for cost-
effective Ethernet connectivity. This versatile G.SHDSL-based product can be used back-to-back
for LAN extension applications or as an access modem to connect to DSLAMS.
The MM702G2 supports 2-wire G.SHDSL at speeds up to 2.3 Mbps or 4-wire at speeds
up to 4.6 Mbps (1 pair/2 pair copper). Designed to enable Web management and remote
downloads, this easy-to-install product combines a WAN interface with complete bridging
and routing functionality.
up to 4.6 Mbps (1 pair/2 pair copper). Designed to enable Web management and remote
downloads, this easy-to-install product combines a WAN interface with complete bridging
and routing functionality.
Features:
SPEC SHEET SPEC SHEET
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
•
Versatile performance supports both point-to-
point and DSLAM operation
point and DSLAM operation
• Easy web-based management program using
standard web browsers
• Built-in SNMP for remote or local management
• Serial RS-232 port for direct or dial-up
management
• Easy-to-use remote code download for software
upgrades
• Standard G.SHDSL EOC messages for loopback
and statistics
• OAM (Operation, Administration and
Maintenance) F4 and F5 support for network
administration and loopback test
administration and loopback test
• Reset button for unit reset
• 10/100 Base-T Ethernet port with MDI/MDI-X
switch next to Ethernet port to connect directly
to a PC with a straight-through cable, eliminating
the need for cross-over cable
to a PC with a straight-through cable, eliminating
the need for cross-over cable
• Supports 8 simultaneous PPP or Bridge/Routing
sessions allowing multiple concurrent
connections to the same or different service
providers with ATM QoS
connections to the same or different service
providers with ATM QoS
• VLAN support
• Rate adaptive synchronization using G.SHDSL
handshake for highest rate, plus manual override
for fixed
for fixed
rate selectable