Champion eucc series ユーザーガイド

It is extremely important that you identify the options installed on the machine BEFORE you begin
repairs. The basic operation of the upright conveyor is the same for all models. If you are not
completely familiar with the design and operation of your machine, please read all the information
contained in this manual before attempting any repairs. What appears to be a serious problem at
first, may be corrected with a simple maintenance or operation check.

Power Requirements:
All models require 3 Phase power.
Standard voltages are available in  208/60/3  240/60/3  460/60/3
Non-standard voltages are available—Consult the factory.

Service Connections:
The main power connection is made at a single point in the Control Cabinet. Optional Electric
Boosters have a separate service connection. Optional Electric Blower dryers have a separate
service connection.

Line Voltage:
Three phase line voltage is supplied to:
Pump motors
Drive Motor
Optional Blower Dryer motor
Electric tank heater elements
Optional Booster tank heater elements

Single phase line voltage is supplied to:
Econo-Rinse pump and motor
Control Transformer — (In control cabinet)
[Step-down Line Voltage: 120VAC]

Control Voltage:
120VAC is supplied by the secondary of the
control transformer to: Control cabinet switches
Remote pushbutton stations The Electric Eye circuit input Pump & Final Rinse Timers Solenoid
Valves
Thermostats
Contactors
Motor starter overloads
Hold-in Relay
24VAC Control Transformer
[Step-down 120VAC:24VAC]