Champion eucc series インストール手順
37
________ Installation Instructions
Section Assemby: Step by Step
Section Assemby: Step by Step
8.
Close the junction box.
9.
Install the cowl to the end of the
blower dryer.
blower dryer.
1.
Wires, flex-tite, and some components were disconnected and pulled back to
each section, then junction boxes
were closed.
each section, then junction boxes
were closed.
2.
Open all junction boxes, identify the
flex-tite conduit connections, (A)
roll-out wire bundles, (B), and match
wire numbers attached on wires, (C).
flex-tite conduit connections, (A)
roll-out wire bundles, (B), and match
wire numbers attached on wires, (C).
3.
Connect the flex-tite conduit to their
associated junction boxes.
associated junction boxes.
4.
Connect matching wires using the
supplied wire nut connectors, (D)
included in the hardware kit.
supplied wire nut connectors, (D)
included in the hardware kit.
5.
Connect #2 and any white wires
together. All of these wires are
neutral returns.
together. All of these wires are
neutral returns.
Connect the dishwasher internal electric wiring
ATTENTION !!!!!!!
Factory Authorized Installation Supervisor
Factory Authorized Installation Supervisor
Proper internal wiring connections are extremely important.
Miswired or loose connections can be difficult to troubleshoot and repair.
Miswired or loose connections can be difficult to troubleshoot and repair.
As the Installation Supervisor, it is your responsibility to inspect and approve
all electrical connections as well as all other installation procedures.
all electrical connections as well as all other installation procedures.
Champion suggests the supervisor, rather than wire the machine himself/herself,
should delegate the internal wiring to another qualified service technician so he/she
can best oversee the complete dishwasher reassembly.
should delegate the internal wiring to another qualified service technician so he/she
can best oversee the complete dishwasher reassembly.