Champion d-h1t ユーザーガイド
4
Figure 1
Remove Front Panel
INSTALLATION
Unpack the dishwasher
CAUTION:
Care should be taken when lifting the
machine to prevent damage.
NOTE:
The installation of your machine must meet
all applicable health and safety codes.
all applicable health and safety codes.
1. Immediately after unpacking the machine,
inspect for any shipping damage. If damage
is found, save the packing material and con-
tact the carrier immediately.
is found, save the packing material and con-
tact the carrier immediately.
2. Remove the dishwasher from the skid.
Move the machine to its permanent location.
3. Level the machine (if required) by placing a
level on the top of the machine and adjusting
the feet. Level the machine front-to-back and
side-to-side.
the feet. Level the machine front-to-back and
side-to-side.
4. Remove the dishracks from the interior of
the machine.
5. Refer to Fig. 1. Remove (2) screws that hold
the front panel. Remove the front panel in
preparation for service connections.
preparation for service connections.
INSTALLATION
Champion
WASH
POWER
WARNING!
TURN OFF POWER BEFORE
SERVICING MACHINE
RINSE PRESSURE
CYCLE
!