Champion d-h1t ユーザーガイド

WARRANTY

Champion Industries, Inc., P.O. Box 4149, Winston-Salem, North Carolina  27115, and P.O. Box 301, 2674 North
Service Road, Jordan Station, Ontario, Canada L0R 1S0, warrants machines, and parts, as set out below. 

Champion, warrants all new machines of its manufacture bearing the name “Champion”

and installed within the United States and Canada to be free from defects in material and workmanship for a period of
one  (1) year after the date of installation or fifteen (15) months after the date of shipment by Champion, whichever
occurs first. [See below for special provisions relating to Model Series CG] The warranty registration card must be
returned to Champion within ten (10) days after installation. If warranty card is not returned to Champion within such
period, the warranty will expire after one year from the date of shipment.

Champion will not assume any responsibility for extra costs for installation in any area where there are
jurisdictional problems with local trades or unions.

If a defect in workmanship or material is found to exist within the warranty period, Champion at its election, will
either repair or replace the defective machine or accept return of the machine for full credit; provided, however, as to
Model Series CG, Champion’s obligation with respect to labor associated with any repairs shall end (a) 120 days after
shipment, or (b) 90 days after installation, whichever occurs first. In the event that Champion elects to repair, the labor
and work to be performed in connection with the warranty shall be done during regular working hours by a Champion
authorized service technician. Defective parts become the property of Champion. Use of replacement parts not autho-
rized by Champion will relieve Champion of all further liability in connection with its warranty. In no event will
Champion’s warranty obligation exceed Champion’s charge for the machine. The following are not covered by
Champion’s warranty:

a.

Lighting of gas pilots or burners.

b.

Cleaning of gas lines.

c.

Replacement of fuses or resetting of overload breakers.

d.

Adjustment of thermostats.

e.

Adjustment of clutches.

f.

Opening or closing of utility supply valves or switching of electrical supply current.

g.

Cleaning of valves, strainers, screens, nozzles, or spray pipes.

h.

Performance of regular maintenance and cleaning as outlined in operator’s guide.

i.

Damages resulting from water conditions, accidents, alterations, improper use, abuse, 

tampering, improper installation, or failure to follow maintenance and operation procedures.

Examples of the defects not covered by warranty include, but are not limited to: (1) Damage to the exterior or 

interior finish as a result of the above, (2) Use with utility service other than that designated on the rating plate, 
(3) Improper connection to utility service, (4) Inadequate or excessive water pressure, (5) Corrosion from chemi-
cals dispensed in excess of recommended concentrations, (6) Failure of electrical components due to connection
of chemical dispensing equipment installed by others, (7) Leaks or damage resulting from such leaks caused by
the installer, including those at machine table connections or by connection of chemical  dispensing equipment
installed by others, (8) Failure to comply with local building codes, (9) Damage caused by labor dispute.

Champion warrants all new machine parts produced or authorized by Champion to be free 

from defects in material and workmanship for a period of 90 days from date of invoice. If any defect in material and
workmanship is found to exist within the warranty period Champion will replace the defective part without charge.

Champion does not authorize any other person, including persons who deal in Champion dishwashing machines, to
change this warranty or create any other obligation in connection with Champion Dishwashing Machines.