Champion ld-36 仕様ガイド
Washer
Automatic washing machine designed to wash all pots, pans and utensils commonly
used in baking and cooking operations.
used in baking and cooking operations.
Cabinet
83" wide x 38" deep x 73" high. Overall height with door open: 101-1/2" (108-1/4"
with optional infrared gas heated rinse tank). Door opening: 74-3/4" wide x 28-1/2"
high. Constructed of 16 gauge, type 304 #3 finish, stainless steel. All seams tig-
welded, cleaned and polished.
with optional infrared gas heated rinse tank). Door opening: 74-3/4" wide x 28-1/2"
high. Constructed of 16 gauge, type 304 #3 finish, stainless steel. All seams tig-
welded, cleaned and polished.
Door
Lift-up door type. Counter balanced with self-lubricating guides. Stainless steel
cables on nylon rollers with calbe guards to insure tracking. Door is interlocked with
limit switch to prevent machine operation while door is open. Door construction: 16
gauge, type 304 #3 finish, stainless steel.
cables on nylon rollers with calbe guards to insure tracking. Door is interlocked with
limit switch to prevent machine operation while door is open. Door construction: 16
gauge, type 304 #3 finish, stainless steel.
Recirculating Wash Tank
Heated by (1) 18 KW 208/240, 480 or optional 575 volt electric immersion heaters,
thermostatically controlled wash temperature and low water protection system. 65
gallons, 14 gauge stainless steel,sloped to drain. Infrared gas and steam heating
options available.
thermostatically controlled wash temperature and low water protection system. 65
gallons, 14 gauge stainless steel,sloped to drain. Infrared gas and steam heating
options available.
Wash Tank Filter
Perforated, stainless steel basket type designed for increased effectiveness and easy
cleaning without emptying wash tank.
cleaning without emptying wash tank.
Wash Tank Fill Valve
Size 1/2" brass material, solenoid type, automatic.
Wash Tank Drain Valve
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
automatic option.
Wash Pump
15 hp, 208/240, 480 or optional 575 volt, 3 phase, 60 cycle. Close coupled; 250
gallons per minute at 35 to 45 psi, mounted on 12 gauge stainless steel formed
channel base.
gallons per minute at 35 to 45 psi, mounted on 12 gauge stainless steel formed
channel base.
Spray Arm Assemblies
Water driven, stainless steel spray arm assembly, with stainless steel jets,
removeable end caps and hand-operated quick release mechanism for easy cleaning
and reassembly.
removeable end caps and hand-operated quick release mechanism for easy cleaning
and reassembly.
Sanitizing Rinse Tank
Stainless steel, 20 gallon capacity, with (1) 18 KW 208/240, 480 or optional 575 volt
electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 12 gallons
per 30 second cycle. Infrared gas and steam coil heating options available.
electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 12 gallons
per 30 second cycle. Infrared gas and steam coil heating options available.
Rinse Supply Valve
Size 1" brass material, solenoid type, automatic.
Final Rinse Piping
Type 304 stainless steel tubing with brass compression fittings and brass or optional
stainless steel full cone rinse jets.
stainless steel full cone rinse jets.
Control & Information Center
120 volt control circuit with push pad operation of “POWER ON,” “STOP” and
“SHORT, MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME
REMAINING” for each cycle. LED’s indicate wash, rinse and unload functions. A
buzzer is also included to provide an audible indication when the machine is ready to
unload. A pre-programmed circuit board allows the push pad to be used as a
“DIAGNOSTIC CENTER” by displaying “ERROR CODES” for ease of
troubleshooting. Moisture resistant gauges measure Wash Temperature, Wash
Pressure and Rinse Temperature.
“SHORT, MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME
REMAINING” for each cycle. LED’s indicate wash, rinse and unload functions. A
buzzer is also included to provide an audible indication when the machine is ready to
unload. A pre-programmed circuit board allows the push pad to be used as a
“DIAGNOSTIC CENTER” by displaying “ERROR CODES” for ease of
troubleshooting. Moisture resistant gauges measure Wash Temperature, Wash
Pressure and Rinse Temperature.
Wash Down Spray Hose
Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled
items and easy cleaning and maintenance of machine.
items and easy cleaning and maintenance of machine.
Steam Exhaust Vent
Steam exhaust vent 12-7/8" diameter, consisting of 14 gauge rolled collar for PVC
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
(2M) 6/05 Printed in U.S.A.
SPECIFICATIONS
MODEL LD-36 UNIVERSAL
PAN & RACK WASHER
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Tel: 905/562-4195 Fax: 905/562-4618