Champion ld-20 仕様ガイド
Washer
Automatic washing machine designed to wash all pots, pans and utensils commonly
used in baking and cooking operations.
used in baking and cooking operations.
Cabinet
50" wide x 36" deep x 73" high. Overall height with door open: 100-3/4".
Door opening: 40" wide x 28-1/2" high. Constructed of 12, 14 & 16 gauge, type 304
#3 finish, STAINLESS STEEL . All seams tig-welded, cleaned and polished.
Door opening: 40" wide x 28-1/2" high. Constructed of 12, 14 & 16 gauge, type 304
#3 finish, STAINLESS STEEL . All seams tig-welded, cleaned and polished.
Door
Front-loading, split door design for easy loading and unloading. The top half of the
door system rises while the lower half folds down to create a space saving drain
table. Door is interlocked with proximity switch to prevent machine operation while
door is open. Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
door system rises while the lower half folds down to create a space saving drain
table. Door is interlocked with proximity switch to prevent machine operation while
door is open. Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
Recirculating Wash Tank
Heated by two 6 (2) KW 208/240, 480 or optional 575 volt electric immersion heater,
thermostatically controlled wash temperature and low water protection system. 36
gallons (27 gallons if infrared heated), 14 gauge STAINLESS STEEL,sloped to drain.
Infrared gas and steam heating options available.
thermostatically controlled wash temperature and low water protection system. 36
gallons (27 gallons if infrared heated), 14 gauge STAINLESS STEEL,sloped to drain.
Infrared gas and steam heating options available.
Wash Tank Filter
Perforated, STAINLESS STEEL basket type, double filter system for increased
effectiveness and easy cleaning without emptying wash tank.
effectiveness and easy cleaning without emptying wash tank.
Wash Tank Fill Valve
Size 1/2" brass material, solenoid type, automatic.
Wash Tank Drain Valve
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
automatic option.
Wash Pump
7-1/2 hp, 208/240, 480 or optional 575 volt, 3 phase, 60 cycle. Close coupled; 120
gallons per minute at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed
channel base.
gallons per minute at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed
channel base.
Spray Arm Assemblies
Water driven, STAINLESS STEEL spray arm assemblies, top and bottom, with
STAINLESS STEEL jets and quick-release mechanism for easy cleaning and
reassembly.
STAINLESS STEEL jets and quick-release mechanism for easy cleaning and
reassembly.
Sanitizing Rinse Tank
STAINLESS STEEL, 10 gallon capacity, with two (2) 6 KW 208/240, 480 or optional
575 volt electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 5
gallons per 27 second cycle. Infrared gas and steam coil heating options available.
575 volt electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 5
gallons per 27 second cycle. Infrared gas and steam coil heating options available.
Rinse Supply Valve
Size 3/4" brass material, solenoid type, automatic.
Final Rinse
Type 304 STAINLESS STEEL tubing with brass compression fittings and brass or
optional STAINLESS STEEL full cone rinse jets.
optional STAINLESS STEEL full cone rinse jets.
Control & Information Center
110 volt control circuit with push pad operation of “POWER ON,” “STOP” and “SHORT,
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING”
for each cycle. LED’s indicated wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A
pre-programmed circuit board allows the push pad to be used as a “DIAGNOSTIC
CENTER” by displaying “ERROR CODES” for ease of troubleshooting. Moisture
resistant gauges measure Wash Temperature, Wash Pressure and Rinse
Temperature.
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING”
for each cycle. LED’s indicated wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A
pre-programmed circuit board allows the push pad to be used as a “DIAGNOSTIC
CENTER” by displaying “ERROR CODES” for ease of troubleshooting. Moisture
resistant gauges measure Wash Temperature, Wash Pressure and Rinse
Temperature.
Wash Down Spray Hose
Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled
items and easy cleaning and maintenance of machine.
items and easy cleaning and maintenance of machine.
Steam Exhaust Vent
Steam exhaust vent 6-3/4" diameter, consisting of 16 gauge rolled collar for PVC
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
(2M) 6/04 Printed in U.S.A.
SPECIFICATIONS
MODEL LD-20 POT, PAN &
UTENSIL WASHER
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 800/532-8591 Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Tel: 905/562-4195 Fax: 905/562-4618