Champion model 66 drwspw 仕様ガイド
Volume crated:
152 cu. ft.
Shipping weight crated:
800 lbs.
Dimensions shown in inches
Warning: Plumbing and electrical connections should be made by qualified personnel who will
observe all the applicable plumbing, sanitary, safety codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied
Note: Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied
(by others) in common water supply line at service connection.
Plumbing Notes: Because of the variation in house-supplied steam and water pressures, steam and
Plumbing Notes: Because of the variation in house-supplied steam and water pressures, steam and
water pressure regulating valves (PRVs) may be needed. (Water PRV is standard on machines with booster.)
The PRVs can either be purchased from Champion or obtained locally.
Venting Notes: Fabricated duct size: 3-7/8” x 15-7/8” (Outside dimensions)
Venting Notes: Fabricated duct size: 3-7/8” x 15-7/8” (Outside dimensions)
Machine only
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
208/60/1
120
150
150
240/60/1
105
150
150
208/60/3
74
100
100
240/60/3
65
90
90
480/60/3
33
45
45
575/60/3
25
35
35
Table a - Machine connecTion
Machine and steam built-in booster
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
208/60/1
42
60
60
240/60/1
37
50
50
208/60/3
29
40
40
240/60/3
26
35
35
480/60/3
12
15
15
575/60/3
10
15
15
Table b - Machine & boosTer connecTion
70°F/39°C Rise – 16 kW
Machine and Electric built-in booster
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
208/60/1
197
250
250
240/60/1
172
225
225
208/60/3
119
150
150
240/60/3
103
125
125
480/60/3
52
70
70
575/60/3
41
50
50
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Utilities
1 Electrical Connection
a Machine only (see Table A)
b Machine & booster (see Table B)
2 Hot Water
3/4” NPT 180°F/82°C min. hot water
connection. (Machine without booster.)
3/4” NPT 140°F/60°C min. hot water
3/4” NPT 140°F/60°C min. hot water
connection. (40°F/22°C rise booster)
3/4” NPT 110°F/49°C min. hot water
3/4” NPT 110°F/49°C min. hot water
connection. (70°F/39°C rise booster)
Flow pressure 20-22 psi.
Flow pressure 20-22 psi.
3 Drain
1-1/2” NPT machine connection.
Maximum flow 15 gpm.
4 Steam
a 3/4” NPT machine connection.
Flow pressure 15-30 PSI. (Steam coil)
b 3/4” NPT machine connection.
b 3/4” NPT machine connection.
Flow pressure 15-30 PSI.
(Steam injector)
5 Condensate (no back pressure)
1/2” NPT machine return to boiler
6 Vents
a Load end: 200 CFM @ 1/4” S.P.
b Unload end: 400 CFM @ 1/4” S.P.
b Unload end: 400 CFM @ 1/4” S.P.
(With blower-dryer increase room
ventilation by 600 CFM.)
Model 66 drWsPW
44” Single Tank Water Saver with 22” Prewash
High Temperature Rack Conveyor
Dishwashing Machine with
Dual Stage Rinse
44” Single Tank Water Saver with 22” Prewash
High Temperature Rack Conveyor
Dishwashing Machine with
Dual Stage Rinse
44” Single Tank Water Saver with 22” Prewash
High Temperature Rack Conveyor
Dishwashing Machine with
Dual Stage Rinse
Model 66 drWsPW
Model 66 drWsPW
sPeciFicaTions
Capacity
Racks per hr. (NSF rated)
148
Wash tank (US gal.)
21
Conveyor speed (ft/min.)
4.1
Motor Horsepower
Drive
1/6
Wash
2
Prewash
1
Dual Rinse
1/10
Water Consumption
US Gal. per hr.
(max. use)
80
US Gal. per rack
.54
Heating
Wash Tank, electric (kW)
15
DualRinse Tank electric (kW)
3.3
Tank heat, steam (lbs/hr.
required at 15 PSI flow pressure)
75
Electric booster (built-in)
(kW supplied for 40°F rise)
10
Electric booster
(kW supplied for 70°F rise)
16
Steam booster (lbs./hr.
required for 40°F rise)
50
Steam booster (lbs./hr.
required for 70°F rise)
80
Venting
Load end (minimum CFM)
200
Unload end (minimum CFM) 400
Standard 20” x 20”
rack complement
Peg
2
Flat
1
40°F/22°C Rise – 10 kW
Machine and Electric built-in booster
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
208/60/1
168
225
225
240/60/1
147
200
200
208/60/3
102
125
125
240/60/3
89
110
110
480/60/3
45
60
60
575/60/3
37
45
45
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618