Champion pp-3 ユーザーズマニュアル

ページ / 67
M A I N T E N A N C E  
¾  Carefully pull the heater and wires out, exposing the electrical connections. 
¾  Disconnect the electrical Connections. 
¾  Remove the gasket. 
Gasket
¾  Get the new heater and slide the gasket over the wires. 
¾  Connect the electrical connection and slide the wires and heater into position. 
¾  Install and tighten the clamp. 
¾  Install the perforated cover. 
¾  Turn on the main power. 
Replacing Thermocouple 
¾  Turn off and lockout the incoming power to the 
control panel. 
¾  Remove the perforated cover located at the back 
of the tank by loosening the two fasteners (see 
illustration in Replacing Heater). 
¾  Remove the clamp by loosening the wing nut. 
¾  Carefully pull the thermocouple and wires out, exposing the electrical connections. 
¾  Disconnect the electrical Connections. 
¾  Remove the gasket.  
¾  Get the new thermocouple 
and slide the gasket over the 
wires. 
Thermocouple 
53