Champion usn-10 ユーザーガイド

PART 6:

REPLACEMENT PARTS

Part 8: SPECIAL BULLETINS

P.O. Box 4146
Winston-Salem, NC 27115
Tel:   336-661-1556
Fax:  336-661-1660
Tel:  800-858-4477

Stemco Thermostat Replacement

Stemco Replaces Fenwall
January 20, 2003

For all Navy machines that are purchased with steam heated boosters.  This notification is
for the replacement of the thermostat in those boosters. To ensure that the thermostat  is
placed properly into the booster tank, please follow the diagram listed below. When replac-
ing the the thermostat use part number 109069.

1. Mark off the measurement of 12 inches from the end of the bulb. This will be at the end
    of the 1/2" nut that mounts inside of the tee.
2. Insert the thermostat bulb 12 inches into the booster. Ensure that the bulb is inside one
    of the copper water tubes and not coiled up inside of the head. Place plumbers putty on
    the 1/2" nut. Tighten down the 1/2" nut inside of the tee.
3. Push the remaining capillary tube to the marking and tighten down the compression nut
    so as to lock down the furrell on the capillary. The thermostat replacement is now
    complete.

Navy Steam Boosters

12 Inches

12 inches