Net Media sc01 仕様ガイド
MAN-MODJBOX REV0707A
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Modulated Camera
In-Wall Junction Box Mounted
NM-MODJBOX
(SC01 SC02 SC03)
Video/Power Connector
Power and video share one coax
through female F connector.
Power Injector
Connects power transformer to coax
for One Wire Video™ installation.
Modulator built into camera
One Wire Video™ installation
Combines with existing TV channels
Viewable on multiple televisions
Provides unobtrusive surveillance
Excellent image quality
Mounts in standard electrical fixtures
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply and power injector
1 year limited warranty
One Wire Video™ installation
Combines with existing TV channels
Viewable on multiple televisions
Provides unobtrusive surveillance
Excellent image quality
Mounts in standard electrical fixtures
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply and power injector
1 year limited warranty
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Modulation Method:
Output Channel:
Output Level:
Output Connector:
Cable Type:
Power Requirement:
Power Connector:
Housing Size:
Base Size:
Weight:
Digital Crystal PLL
UHF 14-69, CABLE 70-94, 100-125
+30dBmV
Female F, 75 Ohm
RG59, RG6 or better
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
2.13“ dia. x 3” long
4” high, 1.9” wide, 1.5“ deep
3.5 oz.
(subject to change without notice)
FEATURES
Product Includes:
1. Camera Assembly (Camera, Camera Bracket, Modulator, Video/Power Connector).
2. Two Lens Cover Inserts (Dark Lens cover, Clear Lens Cover).
2. Power Injector and 12V DC 300mA Power Transformer (Center Conductor Positive).
3. Mounting hardware (Mounting Screws, Grounding Strap and Screw).
2. Two Lens Cover Inserts (Dark Lens cover, Clear Lens Cover).
2. Power Injector and 12V DC 300mA Power Transformer (Center Conductor Positive).
3. Mounting hardware (Mounting Screws, Grounding Strap and Screw).
3.6mm
1/3” CCD
350 lines
72˚ Horizontal
0.7 Lux F2.0
Yes
3.7mm
1/4” CCD
470 lines
54˚ Horizontal
0.5 Lux F1.2
No
The NetMedia MODJBOX (SC01, SC02, SC03) self contained camera and modulator converts its video signal to a selected
television channel. It is powered over the same coax cable that returns the video broadcast signal for One Wire Video™
installation. It mounts in a typical single gang junction (light switch) box and is viewed with a television tuner. Equipment
that does not have a tuner, such as a security monitor, Quad display, or DVR, will require a demodulator (any TV tuner device
with a composite video output such as a VCR) to convert the video for its use.
television channel. It is powered over the same coax cable that returns the video broadcast signal for One Wire Video™
installation. It mounts in a typical single gang junction (light switch) box and is viewed with a television tuner. Equipment
that does not have a tuner, such as a security monitor, Quad display, or DVR, will require a demodulator (any TV tuner device
with a composite video output such as a VCR) to convert the video for its use.
SPECIFICATIONS
B/W
Color
Day/Night Color
3.6mm
1/3” CCD
580 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
B/W
Color
Modulator
Not Shown - Behind Camera Assembly.
Switch bank sets output channel:
UHF 14-69 or CABLE 70-94, 100-125.
Model Camera Type
(SC01) NM-MODJBOX-BB
(SC02) NM-MODJBOX-CB
(SC03) NM-MODJBOX-HB
(SC02) NM-MODJBOX-CB
(SC03) NM-MODJBOX-HB
B&W
Color
Day/Night Color
Color
Day/Night Color
Camera Lens
Comes prefocused from factory
but can be adjusted by rotating
but can be adjusted by rotating
in either direction.
Camera Bracket
Bend to adjust angle of view.
Cover Plate
Not Included
Lens Cover
Snap either the Dark or
Clear cover into Plate.
Camera Assembly
Camera, Bracket, Modulator
Board with connectors.
Junction Box
Not Included
Day/Night
Color
NM-MODJBOX