Dialogue v5 ユーザーガイド
41
Connecting Devices
10
Connecting to a TV
Note:
Before
outputting the
display to a
video device,
check the
device’s input
signal type and
change your
computer’s out-
put signal type
to meet it. The
V5 outputs
NTSC or PAL
video signals.
Select the type
in BIOS Setup
Utility. The
default setting is
Auto.
display to a
video device,
check the
device’s input
signal type and
change your
computer’s out-
put signal type
to meet it. The
V5 outputs
NTSC or PAL
video signals.
Select the type
in BIOS Setup
Utility. The
default setting is
Auto.
You can connect a TV to the Flybook V5 to use as an exter-
nal monitor.
nal monitor.
1.
Plug the 3.5 mm TV cable adapter into the TV cable
jack at the rear of the Flybook V5.
jack at the rear of the Flybook V5.
2.
Connect the other end of the TV cable jack to a com-
posite video RCA cable (yellow connector).
posite video RCA cable (yellow connector).
3.
Press Fn + ~ to change the V5 output to the television.
TV