Sony STR-DA5600ES ユーザーガイド

Lets you set the SURROUND BACK/ZONE 2 
terminals for a bi-amplifier connection or a 
zone 2 connection. 

x OFF

x BI-AMP

x ZONE2

Set “Sur Back Assign” to “OFF,” then connect the 
surround back speakers to this receiver when you 
want to change the connection from a bi-amplifier 
connection or a zone 2 connection to a surround 
back speakers connection. Re-set up the speakers 
after you connect the surround back speakers. See 
“Auto Calibration” (page 47) or “Manual Setup” 
(page 119).

You can adjust each speaker manually on the 
Manual Setup screen. You can also adjust the 
speaker levels after auto calibration is 
completed.

You can adjust each speaker’s level (center, 
surround left/right, surround back left/right, 
front high left/right, subwoofer).

Select the speaker on the screen for 
which you want to adjust the level, then 
press .

Select “Level:,” then press 

.

Set the level of the selected speaker, 
then press 

.

You can adjust the level from –20 dB to 
+10 dB  in  0.5 dB  steps.
For the front left/right speakers, you can 
adjust the balance on either side. You can 
adjust the front left level from FL–10.0 dB 
to FL+10.0 dB in 0.5 dB steps. You can 
also adjust the front right level from 

FR–10.0 dB to FR+10.0 dB in 0.5 dB 
steps.

When one of the sound fields for music is selected, 
no sound is output from the subwoofer if all the 
speakers are set to “LARGE.” However, the sound 
will be output from the subwoofer if the digital input 
signal contains L.F.E. signals, or if the front or 
surround speakers are set to “SMALL,” the sound 
field for movie is selected, or “Portable Audio” is 
selected.

You can adjust the distance from the seating 
position to each speaker (front left/right, 
center, surround left/right, surround back left/
right, front high left/right, subwoofer.)

Select the speaker on the screen for 
which you want to adjust the distance 
from the seating position, then press 

.

Select a “Distance:,” then press 

.

Set the distance of the selected 
speaker, then press 

.

You can adjust the distance from 1.0 meter 
to 10.0 meters (3 feet 3 inches to 32 feet 
9 inches) in 1 cm (1 inch) steps.

You can adjust each speaker’s (front left/right, 
center, surround left/right, surround back left/
right, front high left/right) size.

Select the speaker on the screen for 
which you want to adjust the size, then 
press .

Select a “Size:,” then press 

.

Set the size of the selected speaker, 
then press 

.

• LARGE

If you connect large speakers that will 
effectively reproduce bass frequencies,