Sony STR-DG910 ユーザーガイド
30
US
D:\CANNES\SONY_HA\JOB 2007\STR-DG910\IM_910_US\STR-DG910_data\GB03CON_STR-
DG910-UC.fm
DG910-UC.fm
masterpage: Left
STR-DG910
3-094-430-11 (1)
Notes on converting video
signals
signals
• When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the
video signal output, the image on the TV
screen may appear distorted horizontally or
no image may be output.
your TV, depending on the status of the
video signal output, the image on the TV
screen may appear distorted horizontally or
no image may be output.
• HDMI video signals cannot be converted to
component video signals and video signals.
• The up-converted video signals are output
only from the HDMI OUT jack. They are not
output from any other video jacks.
output from any other video jacks.
• When you play back a VCR with an image
improvement circuit, such as TBC, the
images may be distorted or may not be
output. In this case, set the image
improvement circuit function to off.
images may be distorted or may not be
output. In this case, set the image
improvement circuit function to off.