Siemens M75 ユーザーガイド
Setup
46
© Siemens AG 2003, E:\Auftr
ag\Siemens\MobilePhones\M75
Sirius\en\KA\S_SIR_Setup.fm
Template:
X75, Version 2.
1; VAR Language: en; VAR issue date:
050224
left page (46)
of M75 SIRIUS SUG en, A31008-H7430-A1-1-7619 (18.04.2005, 12:03)
• Auto mode
Your phone is "visible" to other BT
Your phone is "visible" to other BT
devices for several minutes. You will
then be asked if "visibility" should
continue.
Data services
Default setting and activation of the
connection profiles for
MMS, WAP
ap-
plications. The phone default setting
varies from service provider to serv-
ice provider. Consult your service
provider or go to this address on the
Internet for more information
in the "FAQ" section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
in the "FAQ" section.
Authentication
Activate or deactivate encrypted
dial-up (CSD connections only) for
Internet access.
Fax/data
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
Rec. voice/fax
b
Start the required communication
program on your PC and activate
the function on the phone during
the call (the PC will take over the
connection).
Rec. fax/data
Rec. fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed in the phone display. Now
start the communication program on
your PC to receive the fax/data.
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
The keypad is locked automatically
if no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Shown in the display
¨
Bluetooth switched on.
©
Bluetooth visible to others.
Additional information
Block/unblock in standby mode. In each
Block/unblock in standby mode. In each
case:
#
Press and hold.