Intel RS2BL080 ユーザーズマニュアル
Hardware
Intel® RAID Controller RS2BL080 Technical Product Specification
Revision 1.0
Intel order number E64388-001
18
Feature
Intel® RAID Controller RS2BL080
Serial port
4-pin serial debug (requires transceiver)
Compatible devices
32 physical devices, 64 logical drives, mixed capacity drives, SAS and SATA hard drives, and
non-disk devices including expanders.
non-disk devices including expanders.
Firmware
8 MB in flash ROM
2.5 Electrical Characteristics
The PCI Express* Specification requires that the 12-V rail and the 3.3-V rail have a voltage
tolerance of 8% and 9% respectively. The amount of power that an adapter card can use is also
limited.
tolerance of 8% and 9% respectively. The amount of power that an adapter card can use is also
limited.
All power is supplied to the Intel
®
RAID Controller RS2BL080 through the PCI Express* 3.3-V
rails and the 12-V rails. The on-board switching regulator circuitry, operating from these rails,
provides the necessary voltage. The following states determine the typical current consumption
of the controller:
provides the necessary voltage. The following states determine the typical current consumption
of the controller:
State 1: Battery is charging
State 2: Battery is full
State 3: Battery is discharging
The supply voltages are 12 V ± 8 percent from the PCI edge connector only and 3.3 V ± 9
percent from the PCI edge connector only. The following table lists the power supply for the
RAID controller for each state at the different voltages:
percent from the PCI edge connector only. The following table lists the power supply for the
RAID controller for each state at the different voltages:
Table 5. Electrical Characteristics
PCI Express* +12 V
PCI Express* +3.3 V PCI Express* +3.3 V Auxiliary Supply
State 1
823 mA
713 mA
30 mA
State 2
747 mA
760 mA
30 mA
State 3
747 mA
773 mA
30 mA
The voltage level used in the charging circuitry for the battery pack on the optional Intel
®
RAID
Smart Battery AXXRSBBU7 is +12 V. The numbers above are generated with battery attached,
with adapter running heavy I/O pattern.
with adapter running heavy I/O pattern.
2.6 Environmental Specifications
Table 6. Environmental Specifications
Specification
Description
Operating temperature
0 degrees Celsius to 60 degrees Celsius. The maximum operating temperature
decreases to +44.5 degrees Celsius when the Intel
decreases to +44.5 degrees Celsius when the Intel
®
RAID Smart Battery AXXRSBBU7
is installed
Relative humidity range
20% to 80% non-condensing
Airflow
200 linear feet per minute (LFPM)
MTBF (electrical
components)
components)
357,203 hours at 40 degrees Celsius