Roland GW-8 ユーザーガイド
16
Introduction
1.
Turn the [LCD CONTRAST] knob on the rear panel.
1.
Press [MENU].
2.
Use [
] [
] to select “Demo Play” then press [ENTER].
3.
Use the cursor buttons to select the song you want to hear
then press [ENTER].
Press [PIANO (0)] to play back all of the demo songs.
4.
Press [START/STOP] to stop demo playback.
5.
Press [EXIT] to return to the Main screen.
All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a violation
of applicable laws.
purposes other than private, personal enjoyment is a violation
of applicable laws.
No data for the music that is played will be output from MIDI
OUT.
OUT.
You can return all of GW-8’s settings to the factory-set state.
This is called “Factory Reset.”
This is called “Factory Reset.”
If GW-8’s internal memory already contains important data
that you’ve created, all of this data will be lost when you
execute a Factory Reset. If you want to keep your data, you
must save it to USB memory (p. 49).
that you’ve created, all of this data will be lost when you
execute a Factory Reset. If you want to keep your data, you
must save it to USB memory (p. 49).
1.
Press [MENU].
2.
Use [
] [
] to select “Utility” then press [ENTER].
3.
Use the cursor buttons to select “Factory Reset” then press
[ENTER].
The confirmation message will appear.
4.
Press [ENTER] to execute the Factory Reset.
If you press [EXIT] instead, you’re returned to the previous
screen and no Factory Reset takes place.
screen and no Factory Reset takes place.
5.
Turn the power off and then on again.
Restoring the factory settings will initialize the System, User
Performance and Favorite Tone/Performance settings.
Performance and Favorite Tone/Performance settings.
If you turn
[LOCK]
on (button lit), the settings for which you
select the “ON” position (as described below) will not change
even when you switch performances.
even when you switch performances.
Choosing the settings that will be locked
1.
Press and hold [LOCK] (for approximately one second).
2.
Use [
] [
] to select the parameter, and turn the
VALUE dial to select the value.
3.
Press [EXIT].
Adjusting the Display Contrast
([LCD CONTRAST] knob)
([LCD CONTRAST] knob)
Listening to the Demo Song
Restoring the GW-8 to Its
Factory Settings
Factory Settings
Preserving Certain Settings
Even When You Switch
Performances ([LOCK])
Even When You Switch
Performances ([LOCK])
Parameter
Explanation
Value
Style
The Style will not change when
you switch Performances.
you switch Performances.
ON, OFF
Tone
The Tones will not change when
you switch Performances.
you switch Performances.
ON, OFF
Style
Tempo
Tempo
The Style tempo will not change
when you switch Performances.
when you switch Performances.
ON, OFF
Trans-
pose
pose
The transpose setting (p. 22) will
not change when you switch
Performances.
not change when you switch
Performances.
ON, OFF
GW-8_e.book 16 ページ ２００８年７月３０日 水曜日 午後２時４分