Roland juno-stage ユーザーガイド
155
Chapter 11. Other Settings
From the Top Menu window, choose “4. Utility” to access the UTILITY MENU screen.
Here you can save user data to USB memory, or restore data from USB memory back
into the JUNO-STAGE.
into the JUNO-STAGE.
You can save user data to USB memory. This operation is called “User
Backup.”
Backup.”
User data that was backed-up to USB memory can be restored back
into the JUNO-STAGE. This operation is called “User Restore.”
into the JUNO-STAGE. This operation is called “User Restore.”
You can return all of the JUNO-STAGE’s settings to the state they were
in when the instrument was shipped from the factory. This operation is
called “Factory Reset.”
in when the instrument was shipped from the factory. This operation is
called “Factory Reset.”
If the JUNO-STAGE’s internal memory contains important data
that you’ve created, be aware that all of this user data will be lost
when you execute the factory reset operation. If you want to keep
this data, save it to USB memory before you continue.
that you’ve created, be aware that all of this user data will be lost
when you execute the factory reset operation. If you want to keep
this data, save it to USB memory before you continue.
1.
In the UTILITY MENU screen, use the cursor buttons to select
“Factory Reset,” and press [ENTER].
“Factory Reset,” and press [ENTER].
A confirmation message will appear.
2.
To execute the factory reset, [7 (EXEC)].
If you decide to cancel, press [6 (CANCEL)].
When the factory reset has been completed, the following screen
will appear.
will appear.
fig.disp-.eps
3.
Turn the power of the JUNO-STAGE off, then on again.
You can initialize (format) USB memory. This operation is called “USB
Memory Format.”
Memory Format.”
If the USB memory contains important data that you’ve created,
be aware that all of this data will be lost when you execute this
operation.
be aware that all of this data will be lost when you execute this
operation.
1.
In the UTILITY MENU screen, use the cursor buttons to select “USB
Memory Format,” and press [ENTER].
Memory Format,” and press [ENTER].
A confirmation message will appear.
2.
To exit the format operation, press [7 (EXEC)].
If you decide to cancel, press [6 (CANCEL)].
Utility
Backing Up User Data (User Backup)
Restoring Backed-Up Data (User Restore)
Returning to the Factory Settings
(Factory Reset)
Initializing USB Memory (USB Memory Format)
JUNO-STAGE_e.book 155 ページ ２００８年１０月１７日 金曜日 午後１２時２７分