Roland juno-stage ユーザーガイド
46
Chapter 2. Selecting Sounds
You can view a patch list and select a patch from that list.
1.
Press [PATCH].
The JUNO-STAGE will enter Patch mode, and the PATCH PLAY
screen will appear.
screen will appear.
2.
Press one of the [RHYTHM]–[BASS] (category group) buttons to
select the desired category group.
select the desired category group.
3.
Press [ENTER].
The PATCH LIST screen will appear.
fig.disp-patchlist.eps
4.
Use [
] [
] to select the desired patch category.
Select a category within the currently selected category group.
You can also use the category group buttons to select the
category group.
category group.
5.
Use the VALUE dial or [DEC] [INC] to select the desired patch
(rhythm set).
(rhythm set).
If you press [EXIT] instead of pressing [ENTER], you’ll return to the
previous screen without the patch number being changed.
previous screen without the patch number being changed.
Here’s how to select a patch by entering the desired patch number.
1.
Press [PATCH].
The JUNO-STAGE will enter Patch mode, and the PATCH PLAY
screen will appear.
screen will appear.
2.
Use the cursor buttons to move the cursor to the patch group.
3.
Use the VALUE dial or [DEC] [INC] to select the desired patch
group.
group.
4.
Use the cursor buttons to move the cursor to the patch type.
5.
Use the VALUE dial or [DEC] [INC] to select “Patch” or “Rhythm.”
6.
Use the cursor buttons to move the cursor to the patch number.
7.
Press [NUMERIC] so it’s lit.
The [0]–[9] buttons will light.
8.
Use the [0]–[9] buttons to enter the desired patch number, and
press [ENTER].
press [ENTER].
When you finalize the input, the [0]–[9] buttons will return to their
previous state of illumination.
previous state of illumination.
If you press [NUMERIC] without pressing [ENTER], the [0]–[9]
buttons will return to their previous state without changing the
patch number.
buttons will return to their previous state without changing the
patch number.
You can switch patches by using a pedal switch (such as the
separately available FS-5U or FS-6) connected to the PATCH SELECT
jack.
separately available FS-5U or FS-6) connected to the PATCH SELECT
jack.
You can use a stereo cable (sold separately) to connect either two
pedal switches (sold separately) or one pedal switch (such as one
from the DP series; sold separately) to the PATCH SELECT jack.
pedal switches (sold separately) or one pedal switch (such as one
from the DP series; sold separately) to the PATCH SELECT jack.
When you press a pedal that’s connected to the PATCH SELECT jack,
the patch number is incremented or decremented according to the
number of times you’ve pressed the pedal, and the patch will be
changed accordingly.
the patch number is incremented or decremented according to the
number of times you’ve pressed the pedal, and the patch will be
changed accordingly.
If you’ve connected only one pedal, pressing the pedal will increment
the patch number.
the patch number.
This pedal will function according to the system setting “Patch
Select.” If “Patch Select” is assigned to “AUTO UP/(DOWN),”
you’ll be able to switch patches as described above. In
Performance mode, pressing the pedal will switch performances,
and if FAVORITE [ON/OFF] is on, pressing the pedal will switch
favorites. For details, refer to the system setting “Patch Select” (p.
147).
Select.” If “Patch Select” is assigned to “AUTO UP/(DOWN),”
you’ll be able to switch patches as described above. In
Performance mode, pressing the pedal will switch performances,
and if FAVORITE [ON/OFF] is on, pressing the pedal will switch
favorites. For details, refer to the system setting “Patch Select” (p.
147).
Selecting Patches from the Patch List
Selecting Patches by Number ([NUMERIC])
Patch Category
Category Group
Using a Pedal to Select Patches
(PATCH SELECT Pedal)
DOWN
UP
UP
Red
White
Stereo Cable
DP series
JUNO-STAGE_e.book 46 ページ ２００８年１０月１７日 金曜日 午後１２時２７分