Roland juno-stage ユーザーガイド

 

A performance contains patch (or rhythm set) assignments for each 
part, as well as volume and pan settings.

When you switch performances, you are calling up the settings for 
parts 1–16 together with other related settings saved in that 
performance.

 

In Performance mode, there is a “keyboard switch” setting that 
specifies which of the parts 1–16 will produce sound. When you 
play the keyboard in Performance mode, you’ll hear the parts 
whose keyboard switch is “ON” and the part that is currently 
selected (the “current part”). For more about the keyboard switch, 
refer to “Selecting the Parts that will Produce Sound (Keyboard 
Switch)” (p. 134).

 

If you want to keep a performance you’ve edited, press [WRITE] to 
save it as a user performance. For details on saving, refer to “Saving 
a Performance You’ve Created ([WRITE])” (p. 133).

A performance contains the following settings.

• All parameters that can be edited from the PERFORM PLAY 

• Settings for the D Beam and other controllers (p. 135)

• Arpeggio and chord memory settings (p. 60, p. 64)

• Rhythm pattern group number (p. 74)

• The contents of effect editing done in Performance mode (p. 82)

 

When you edit a performance, an “*” will be shown in the 
PERFORM PLAY screen.

 

The changes you make by editing a performance are temporary; 
they will be discarded when you turn off the power or select 
another performance. If you want to keep the changes to a 
performance you’ve edited, you must save it to user memory (p. 
133).

The JUNO-STAGE’s performances are organized into two groups: 
user and preset.

 

This is a group of rewritable performances inside the JUNO-STAGE. 
Performances you create can be saved in this group. The user group 
already contains 64 performances.

 

This is a group of non-rewritable performances inside the JUNO-
STAGE. However, since you are free to edit the currently selected 
performance, you can select a preset performance, edit it, and write 
the edited performance into the user group.

 

The JUNO-STAGE will enter Performance mode, and the 
PERFORM PLAY screen will appear.

 

fig.disp-prfrmplay.eps

 

When the cursor is located at the performance number, you can press 
[ENTER/LIST] to access the PERFORMANCE LIST screen.

 

fig.disp-prfrmlist.eps

 

Use [

] [

] to select the performance group, use the VALUE dial 

or [DEC] [INC] to select the desired performance, and press [ENTER].

Your choice of performance will be confirmed, and you will return to 
the PERFORM PLAY screen.

If you press [EXIT] instead of pressing [ENTER], you’ll return to the 
previous screen without the performance number being changed.

JUNO-STAGE_e.book 49 ページ ２００８年１０月１７日　金曜日　午後１２時２７分