Roland juno-stage ユーザーガイド
57
Chapter 3. Versatile Performance Functions
On the JUNO-STAGE you can play a monophonic synthesizer whose
pitch is controlled by the D Beam controller.
pitch is controlled by the D Beam controller.
1.
Hold down [SHIFT] and press D BEAM [SOLO SYNTH].
A screen like the following appears.
2.
Press [
] [
] to select the parameter.
3.
Use the VALUE dial or [DEC] [INC] to make settings.
4.
If you want to keep these settings, press [7 (WRITE)].
You can use the function keys shown in the bottom of the screen to
access the D Beam assignable or active expression setting screens.
access the D Beam assignable or active expression setting screens.
5.
Press [EXIT] to return to the previous screen.
Setting for the Solo Synth are saved for system settings.
You can use the D Beam controller to apply the ideal type of
expression for each sound.
expression for each sound.
Example uses
• Select the “USER 23 String Ens” patch
By controlling LEVEL and CUTOFF simultaneously, you can give
the sound more impact.
the sound more impact.
• Select the “USER 44 SuperSawSlow” patch
By controlling CUTOFF and RESONANCE simultaneously, you
can produce a distinctive synthesizer sound.
can produce a distinctive synthesizer sound.
The way in which expression is applied will differ for each
sound. For some sounds, the effect may be difficult to notice.
sound. For some sounds, the effect may be difficult to notice.
When using the D Beam controller to control active expression, use
the following procedure to set the variable range.
the following procedure to set the variable range.
1.
Hold down [SHIFT] and press D BEAM [ACTIVE EXPRESS].
A screen like the following appears.
2.
Press [
] [
] to select the parameter.
3.
Use the VALUE dial or [DEC] [INC] to make settings.
4.
If you want to keep these settings, press [7 (WRITE)].
You can use the function keys shown in the bottom of the screen
to access the D Beam controller assignable or solo synth setting
screens.
to access the D Beam controller assignable or solo synth setting
screens.
5.
Press [EXIT] to return to the previous screen.
Setting for the Active Expression are saved for system settings.
You can assign various functions to the D Beam controller and apply a
wide range of effects to the sound in real time.
wide range of effects to the sound in real time.
1.
Hold down [SHIFT] and press D BEAM [ASSIGNABLE].
A screen like the following appears.
(Example screen in Patch mode)
2.
Press [
] [
] to select the parameter.
3.
Use the VALUE dial or [DEC] [INC] to make settings.
For details on the available parameters and values, refer to “[4
(DBASGN)]” (p. 136) in Performance mode, and refer to “[5
(ASSIGN)]” (p. 153) in Patch mode.
(DBASGN)]” (p. 136) in Performance mode, and refer to “[5
(ASSIGN)]” (p. 153) in Patch mode.
You can use the function keys shown in the bottom of the screen
to access the D Beam controller active expression or solo synth
setting screens.
to access the D Beam controller active expression or solo synth
setting screens.
4.
Press [EXIT] to return to the previous screen.
In Performance mode, the assignable settings are saved as
settings of the performance. If you want to save these settings,
press [WRITE] to save them in the performance (p. 133).
settings of the performance. If you want to save these settings,
press [WRITE] to save them in the performance (p. 133).
In Patch mode, the assignable settings are saved as system
settings. If you want to keep these settings, press [7 (WRITE)].
settings. If you want to keep these settings, press [7 (WRITE)].
SOLO SYNTH
ACTIVE EXPRESSION
ASSIGNABLE
JUNO-STAGE_e.book 57 ページ ２００８年１０月１７日 金曜日 午後１２時２７分