Roland juno-stage ユーザーガイド
63
Chapter 3. Versatile Performance Functions
7.
Press [7 (STP REC)] to add a check mark (
✔
).
Now you’re ready to step-record.
• To move to the desired input location, press cursor buttons.
• To input notes, play the keyboard.
• To input a tie, press [3 (TIE)].
• To input a rest, press [4 (REST)].
• To erase the note, hold down [SHIFT] and press [7 (CLR NOTE)].
• To erase all notes at the current step, hold down [SHIFT] and
press [6 (CLR STEP)].
• By pressing [5 (PREVU)] to add a check mark (
✔
) you can
listen to the style that you’re entering.
A maximum of sixteen note numbers (pitches) can be used in a
single style.
single style.
8.
When you have finished, press [6 (EXIT)].
Entry Using the VALUE Dial and Buttons
With this method, you use the cursor to specify the step and pitch to
input, and use the VALUE dial or [DEC] [INC] to enter the values.
input, and use the VALUE dial or [DEC] [INC] to enter the values.
This method is convenient when you need to edit or modify a style
that’s already been input.
that’s already been input.
1.
In the ARPEGGIO STYLE EDIT screen, press [7 (STP REC)] to clear
the check mark (
the check mark (
✔
).
Proceed as follows to input the steps.
• Use the cursor buttons to specify the step and pitch to input.
* When using this method to input, you can’t use the
keyboard to specify pitches. (You won’t be entering notes
as you did in Step Recording.)
as you did in Step Recording.)
• Use the VALUE dial or [DEC] [INC] to enter the velocity value.
You can enter a tie by turning the VALUE dial all the way to
the right (or by pressing [INC] to raise the value all the way).
the right (or by pressing [INC] to raise the value all the way).
• You can also enter a tie by pressing [3 (TIE)].
• To enter a rest, press [4 (REST)].
• If you press [5 (PREVU)] to display the check mark (
✔
), you’ll
be able to hear the pattern you’re inputting.
A maximum of sixteen different note numbers (pitches) can be
used in a single style.
used in a single style.
2.
When you’ve finishing inputting, press [6 (EXIT)].
You will return to the ARPEGGIO STYLE screen.
An arpeggio style you’ve created is temporary, and will be lost when
you turn off the power or select a different style. If you want to keep a
style you’ve created, you must save it in the JUNO-STAGE’s user
memory.
you turn off the power or select a different style. If you want to keep a
style you’ve created, you must save it in the JUNO-STAGE’s user
memory.
In Performance mode, the arpeggio parameters (Arpeggio Style,
Grid, Motif, Duration, etc.) can be saved for each performance
(p. 133). These parameters cannot be saved in a patch.
Grid, Motif, Duration, etc.) can be saved for each performance
(p. 133). These parameters cannot be saved in a patch.
1.
When you’ve finished creating an arpeggio style in the
ARPEGGIO STYLE EDIT screen, press [EXIT] to access the
ARPEGGIO STYLE screen.
ARPEGGIO STYLE EDIT screen, press [EXIT] to access the
ARPEGGIO STYLE screen.
2.
Press [7 (WRITE)].
The ARPEGGIO STYLE NAME screen will appear.
fig.ArpWrite_70
3.
Assign a name to the arpeggio style.
4.
When you’ve finished assigning the name, press [7 (WRITE)].
A screen in which you can specify the save destination will
appear.
appear.
5.
Use the VALUE dial, [DEC] [INC], or [
] [
] to specify the save
destination.
6.
Press [7 (WRITE)].
A confirmation message will appear.
If you decide to cancel, press [6 (CANCEL)].
7.
Press [7 (EXEC)] to save the arpeggio style.
Never turn off the power while data is being saved.
Saving an Arpeggio Style You’ve Created
(WRITE)
JUNO-STAGE_e.book 63 ページ ２００８年１０月１７日 金曜日 午後１２時２７分