Roland juno-stage ユーザーガイド
89
Chapter 7. Connecting an External MIDI Device
You can connect external MIDI devices to the JUNO-STAGE’s MIDI
OUT connector, and use the JUNO-STAGE to control the connected
MIDI devices.
OUT connector, and use the JUNO-STAGE to control the connected
MIDI devices.
Connection Example
fig.midi-contoroll_e.eps
1.
Press [MIDI CONTROLLER] so it’s lit.
The MIDI CONTROLLER screen will appear, and the JUNO-
STAGE will be in MIDI Controller mode.
STAGE will be in MIDI Controller mode.
When you press one of the [0]–[9] buttons, the program change
message assigned to that button will be transmitted.
message assigned to that button will be transmitted.
You can turn the SOUND MODIFY knobs to transmit control
change messages.
change messages.
2.
To exit MIDI controller mode, press [MIDI CONTROLLER] to turn off
the button’s illumination.
the button’s illumination.
The D Beam controller and [S1] [S2] will not operate when
you’re in MIDI controller mode.
you’re in MIDI controller mode.
Set the JUNO-STAGE’s transmit channel so it matches the channel
your external MIDI device is using for reception.
your external MIDI device is using for reception.
1.
In the MIDI CONTROLLER screen, use the cursor buttons to move
the cursor to the “MIDI Ch” value.
the cursor to the “MIDI Ch” value.
2.
Use the VALUE dial or [DEC] [INC] to edit the value.
Range:
Range:
1–16
For details on how to set the receive channel of your external
MIDI device, refer to its owner’s manual.
MIDI device, refer to its owner’s manual.
fig.disp-midicontroll.eps
You can set the keyboard to Split (p. 51) or Dual (p. 51) modes
even in MIDI controller mode. When you play the keyboard, the
performance data from the Upper and Lower parts will be
transmitted on the MIDI channels assigned for each. Operations
of the [0]--[9] buttons or the SOUND MODIFY knobs are sent to
the MIDI channel of the part indicated by
even in MIDI controller mode. When you play the keyboard, the
performance data from the Upper and Lower parts will be
transmitted on the MIDI channels assigned for each. Operations
of the [0]--[9] buttons or the SOUND MODIFY knobs are sent to
the MIDI channel of the part indicated by
.
The note numbers transmitted in MIDI controller mode are
determined by the key you press, the transpose setting (p. 52),
and the octave shift setting (p. 52) you specify in MIDI controller
mode.
determined by the key you press, the transpose setting (p. 52),
and the octave shift setting (p. 52) you specify in MIDI controller
mode.
You can use the arpeggio (p. 60) and chord memory (p. 64)
functions even when you’re in MIDI Controller mode.
functions even when you’re in MIDI Controller mode.
1.
In the MIDI CONTROLLER screen, use the cursor buttons to select
the parameter that you want to edit.
the parameter that you want to edit.
2.
Use the VALUE dial or [DEC] [INC] to edit the value.
3.
To save your settings, press [WRITE].
Using the JUNO-STAGE as a
Master Keyboard
(MIDI Controller Mode)
Specifying the Transmit Channel
MIDI OUT
MIDI IN
MIDI sound module
JUNO-STAGE
Detailed Settings in MIDI Controller Mode
Parameter
Explanation
Range
Local Sw
Specifies whether MIDI
messages will be sent to the
JUNO-STAGE’s own internal
sound generator when you
operate the JUNO-STAGE.
messages will be sent to the
JUNO-STAGE’s own internal
sound generator when you
operate the JUNO-STAGE.
OFF, ON
MIDI Ch
Specifies the channel on
which MIDI messages will
be transmitted.
which MIDI messages will
be transmitted.
1–16
Button
Selects the number of the
button for which you’ll assign
an MSB, LSB, and PC.
button for which you’ll assign
an MSB, LSB, and PC.
0–9
PC
Program Change number
that is transmitted
that is transmitted
1–128
MSB
MSB that is transmitted
0–127, OFF
(If you specify
“OFF,” the LSB will
also be OFF.)
(If you specify
“OFF,” the LSB will
also be OFF.)
LSB
LSB that is transmitted
0–127, OFF
(If MSB is “OFF,” this
will also be “OFF”
automatically.)
will also be “OFF”
automatically.)
Knob
Selects the SOUND
MODIFY knob for which
you’ll make a controller
assignment.
MODIFY knob for which
you’ll make a controller
assignment.
ATTACK,
RELEASE,
EQ LOW,
EQ HIGH,
REVERB,
CUTOFF,
RESONANCE
RELEASE,
EQ LOW,
EQ HIGH,
REVERB,
CUTOFF,
RESONANCE
(Control
Change)
Change)
Specifies the controller
assignment for the selected
SOUND MODIFY knob.
assignment for the selected
SOUND MODIFY knob.
CC01–31,
CC33–95,
PITCH BEND,
AFTERTOUCH
CC33–95,
PITCH BEND,
AFTERTOUCH
JUNO-STAGE_e.book 89 ページ ２００８年１０月１７日 金曜日 午後１２時２７分