Roland juno-stage ユーザーガイド
93
Chapter 7. Connecting an External MIDI Device
Here’s how to specify the USB driver that will be used when the
JUNO-STAGE is connected to your computer via the USB MIDI
connector.
JUNO-STAGE is connected to your computer via the USB MIDI
connector.
If you want to change this setting, disconnect the USB cable
before doing so.
before doing so.
1.
Press [MENU].
2.
Use [
] [
] to select “1. System” and press the [ENTER].
3.
Press [2 (GENERAL)].
4.
Press [2 (COMMON)].
5.
Use the cursor buttons to move the cursor to “USB Driver.”
6.
Use the VALUE dial or [DEC] [INC] to specify the driver.
A confirmation message will appear.
Press [7 (CLOSE)] to return to the previous screen.
7.
Press the [7 (WRITE)] button.
8.
Turn the power off, then on again.
If you change the “USB Driver” setting, you must turn the power
off, then on again to ensure that the JUNO-STAGE will operate
correctly.
off, then on again to ensure that the JUNO-STAGE will operate
correctly.
The included JUNO-STAGE Editor/Librarian/Playlist Editor software
will help you enjoy the full potential of the JUNO-STAGE.
will help you enjoy the full potential of the JUNO-STAGE.
JUNO-STAGE Editor lets you use your computer to edit the JUNO-
STAGE’s sounds and other settings. Parameters can be assigned to
sliders and knobs in the screen of your computer, allowing you to edit
efficiently in a graphical manner.
STAGE’s sounds and other settings. Parameters can be assigned to
sliders and knobs in the screen of your computer, allowing you to edit
efficiently in a graphical manner.
JUNO-STAGE Librarian is software that lets you manage the JUNO-
STAGE’s parameters as a library on your computer, allowing efficient
management of patches, rhythm sets, and performances.
STAGE’s parameters as a library on your computer, allowing efficient
management of patches, rhythm sets, and performances.
Playlist Editor is software that lets you create playlists for the Song
Player (p. 68).
Player (p. 68).
Carefully read the Readme file in the “JUNO-STAGE Editor CD” CD-
ROM included with the JUNO-STAGE, and install JUNO-STAGE
Editor/Librarian/Playlist Editor as directed.
ROM included with the JUNO-STAGE, and install JUNO-STAGE
Editor/Librarian/Playlist Editor as directed.
Windows Users
Refer to “Readme_E.txt” on the “JUNO-STAGE Editor CD” CD-ROM
Macintosh Users
Refer to “Readme_E.txt” on the “JUNO-STAGE Editor CD” CD-ROM
Making Connections
1.
Set the USB driver selection to “VENDER.”
2.
Use a USB cable (sold separately) to connect the JUNO-STAGE to
your computer.
your computer.
Specifying the USB Driver
Parameter
Value
Explanation
USB Driver
VENDER
Choose this if you want to use a
USB driver from the included
CD-ROM or a USB driver
downloaded from the Roland
website.
USB driver from the included
CD-ROM or a USB driver
downloaded from the Roland
website.
GENERIC
Choose this if you want to use
the generic USB driver provided
by your computer’s operating
system.
the generic USB driver provided
by your computer’s operating
system.
Using JUNO-STAGE Editor/
Librarian/Playlist Editor
Installing JUNO-STAGE Editor/Librarian/
Playlist Editor in Your Computer
JUNO-STAGE_e.book 93 ページ ２００８年１０月１７日 金曜日 午後１２時２７分