Roland PCR-1 オーナーマニュアル

 

Use MIDI functionality

 

Here’s how to save the settings of the 

 

 into internal memory.

You can save settings into internal memory numbers 1–F.
You cannot save to memory number 0 (GM2).

 

fig.edt2

 

Press the 

 

 button.

The display will indicate “EDT”.

 

fig.sav

 

Press the 

 

 key.

The display will blink “SAV.”

 

fig.ptc

 

Confirm what’s indicated and press the 

 

 button.

If the display indicates “PTC”, it means that the Save could not be carried out 
because the PROTECT setting (p. 92) is on. Turn PROTECT off, and then try the 
operation once again from step 1.

 

Select a memory number 1–F. Use the 

 

 

 

 buttons or the 

 

– 

 

 keys to specify the 

save-destination memory number.

The specified memory number will blink in the display.

 

Confirm what’s indicated and press the 

 

 button.

The PCR has the following sixteen memories.

 is a location into which you can recall one of these memories.

In order to use one of the saved memories, you must recall it into current memory as described 
in Memory mode (MEMORY) (p. 59).
The contents of current memory will be lost when you turn off the power. If you have modified 
the settings in current memory, perform the “SAVE” operation if you want to keep your 
changes.
You can set the STARTUP MEMORY (p. 95) setting to specify the memory that will be loaded 
into current memory when you turn on the power.

GM2 SET

Cannot be saved

User memories 
(15)

Can be saved

PCR-1_e.book 88 ページ ２００４年３月１６日　火曜日　午後２時５５分