Roland RS-70 オーナーマニュアル

 

Performing with a

computer

 

With the RS-70 disconnected, start up Windows.

Disconnect all USB cables except for a USB keyboard and USB mouse (if used).

 

Exit all currently running software (applications).

Also close any open windows. If you are using virus checking or similar software, be 
sure to exit it as well.

 

Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive of your computer.

 

Open the 

 

 dialog box.

Click the Windows 

 

 button. 

From the menu that appears, select 

 

fig.Win-22.e

 

In the dialog box that appears, input the 
following into the 

 

 field, and click 

 

.

 

fig.Win-23.e

 

The 

 

 dialog box will appear.

You are now ready to install the driver.

 

Connect the RS-70.

 

With the RS-70’s power switch turned 
off, connect it to the AC adaptor.

 

Plug the AC adaptor into an AC power 
outlet.

 

Use the USB cable to connect the RS-70 to your computer.

 

Set the RS-70’s power switch to the 

 

 position.

 

fig.Win-24.e

 

If you are using Windows 98, an 

 

 dialog box will appear.

Click 

 

.

In this manual, the location 
of folders and files is given 
in terms of the file path, 
using \ as the delimiter. 
For example, 
Win98\SETUPINF.EXE

 

indicates the 
SETUPINF.EXE

 file found 

in the Win98 folder.

This unit is equipped with 
a protection circuit. A brief 
interval (a few seconds) 
after power up is required 
before the unit will operate 
normally.

If you are using Windows 
98 and the Insert Disk 
dialog box dose not appear, 
please read The “Insert 
Disk” dialog box does not 

RS-70_e4.book 147 ページ ２００３年８月１８日　月曜日　午前９時４７分