Roland RS-70 オーナーマニュアル
62
Creating a patch (Patch mode)
Transmitting patch/rhythm settings
from the MIDI OUT connector
(XFER to MIDI)
You can transmit the settings of any patch from the MIDI OUT
connector. This function can be used to save patch settings on an
external sequencer.
connector. This function can be used to save patch settings on an
external sequencer.
1.
Press [PATCH] so it lights and you are in Patch mode.
Select the patch or the rhythm set you want to output.
2.
Press [UTILITY].
3.
Use PAGE/CURSOR [
]/[
] to select “4:XFER to MIDI.”
4.
Press [ENTER].
5.
Use VALUE [-]/[+] to select “CURRENT PATCH” or “USER
PATCHES.”
If you selected “CURRENT PATCH,” proceed to step 8.
6.
Press PAGE/CURSOR [
] to specify the first number of the
range of user patch numbers that you want to transmit.
fig.r03-24_40
7.
Press PAGE/CURSOR [
] to specify the last number of the
range of user patch numbers that you want to transmit.
fig.r03-25_40
8.
Press [ENTER].
The selected patch settings will be transmitted from the MIDI
OUT connector.
OUT connector.
After the data has been transmitted, the display will indicate
“COMPLETED.” This ends the procedure.
“COMPLETED.” This ends the procedure.
Restoring the factory settings
(FACTORY RESET)
You can also perform the FACTORY RESET operation from Patch
Utility.
Utility.
RS-70_e4.book 62 ページ ２００３年８月１８日 月曜日 午前９時４７分