Roland rk-500 ユーザーガイド
31
Before You Play
fig.ConnectDisplay.eps
Types of display that can be connected
In general, you can connect any display that is sold as a “multiscan monitor.” However,
to be certain, please check the following specifications before you connect your display.
to be certain, please check the following specifications before you connect your display.
Making Connections
Before you make connections to other devices, you must turn down the volume of all
devices and turn off the power to prevent malfunctions or damage to your speakers.
devices and turn off the power to prevent malfunctions or damage to your speakers.
1.
2.
Connect the VIMA to your display.
Use a commercially available monitor cable to connect the VIMA’s ANALOG RGB OUTPUT
connector to the analog RGB connector of your display.
connector to the analog RGB connector of your display.
3.
4.
Switch on the connected display.
For details on how to use your external display, refer to the owner’s manual for your
display.
display.
Connecting an External Display
Resolution
800 x 480 pixels or more
Horizontal scan rate
31.5 kHz
Vertical scan rate
60 Hz
Connector
Three-row 15-pin D-sub type
Signal
Analog
External Display
ANALOG RGB
OUTPUT Connecter
Rear of the VIMA’s bottom panel
Monitor Cable
(Commercially available)
NOTE
NOTE
RK-500-e.book 31 ページ ２００６年８月１１日 金曜日 午後４時２９分