Edirol R-09HR オーナーマニュアル

This section provides tips on solving problems that may occur.

• If using an external microphone, check whether the microphone is set to stereo or monaural. If 

the microphone is a monaural one, only the L channel (left) is recorded. 

To record both channels using a monaural microphone, set the microphone type to “MONO.”

“Setting the external microphone type (EXT Mic Type)” (p. 101)

• Check the amount of space available on the memory card. 

Recording is impossible if there is less than 16 KB available. Recording standby cannot be 

entered either.

“Estimated recording times” (p. 36)

• When using the [Internal MIC], do not connect anything to the other input jacks. If a 

microphone, cable, or device is connected to the [MIC Input Jack] or [LINE IN Jack], the 

[Internal MIC] cannot be used.

“MIC INPUT jack” (p. 11), “LINE IN jack” (p. 11), 
“Using the internal microphones” (p. 37)

• When using an external microphone, please do not connect anything to the [LINE IN Jack]. 

If a microphone, cable, or other device is connected to the [Line In Jack], then the input from 

the [MIC Input Jack] is ignored.

“MIC INPUT jack” (p. 11), “LINE IN jack” (p. 11), 
“Using external microphones” (p. 41)

• When using an external microphone, make sure to choose the settings appropriate for the 

microphone being used.

“Set the type of microphone being used.” (p. 43)

• Is a phantom powered microphone connected?

The R-09HR does not support phantom powered microphones.

• Sound becomes distorted if the input level is too high. Set the input level to an appropriate 

value.

“Adjusting recording levels” (p. 45)