Motorola i1000 ユーザーガイド
GETTING STARTED
61
i1000
VEHICULAR BATTERY CHARGER
The NTN8655A Vehicular Battery Charger (VBC) enables in-
vehicle communications by providing power to the portable unit as
well as charging the portable’s Lithium Ion battery. The VBC is a
power supply that allows the portable’s internal charger to charge the
battery.
vehicle communications by providing power to the portable unit as
well as charging the portable’s Lithium Ion battery. The VBC is a
power supply that allows the portable’s internal charger to charge the
battery.
The power light (green LED) will light when the VBC is receiving
power.
power.
Figure 2: Installing the Vehicular Battery Charger
Installing the Vehicular Battery Charger
(Refer to Figure 2)
(Refer to Figure 2)
1. Attach the Vehicular Battery Charger’s accessory connector to
the bottom of the portable. While holding the i1000 with its
front toward you, insert the accessory connector with the
Motorola logo facing you into slot on the bottom of the i1000
until you hear an audible click.
front toward you, insert the accessory connector with the
Motorola logo facing you into slot on the bottom of the i1000
until you hear an audible click.
2. Remove the vehicle’s cigarette lighter plug from the cigarette
lighter receptacle.
3. Plug the Vehicular Battery Charger’s cigarette lighter adapter
into the cigarette lighter receptacle. The power light (green
LED) will come on.
LED) will come on.
4. The i1000 portable may be left off, turned on, or used.
Cigarette Lighter
Adapter
Adapter
Accessory
Connector
Connector
Accessories
i1000 Page 61 Wednesday, June 17, 1998 1:53 PM