Motorola I275 ユーザーガイド

ページ / 155
5
 Activating Service
Remove the battery by pushing the battery 
toward the antenna and lifting it out.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion 
chargers provide optimum performance. Other 
chargers may not fully charge the iDEN Lithium 
Ion battery or may yield a reduced number of 
lifetime charge cycles. 
• Extreme temperatures degrade battery 
performance. Do not store the battery where 
temperatures exceed 140°F (60°C) or fall below 
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate 
and without use, lose about 1% of their charge 
per day.
• The battery capacity is degraded if the battery is 
stored for long periods while fully charged. If 
long term storage is required, store at half 
capacity. 
Activating Service
The first time you power on your phone, you must 
be in your local calling area. This activates your 
service.
Powering On and Off
The first time you power your phone on, a screen 
may appear asking you to update your browser 
information. This means you must enable security.
To power your phone on:
Press 
p.
To power your phone off:
Press and hold 
p.
When You Power On For the First 
Time
If the Enter SIM PIN Code screen appears, enter 
your SIM PIN. See “Entering the PIN” on page 11
Press 
A under Ok.
When you receive your phone, the SIM PIN is 
0000. Change your PIN to prevent fraudulent use 
of the SIM card (see “Changing the PIN” on
page 11).