Motorola i335 ユーザーガイド

basics

use GPS with map 
software

Your phone is enabled with a highly-capable 

GPS receiver that sends location information 

to a USB port on a PC, laptop, or PDA.
Note: No serial port connectivity is provided 

by your phone. Applications on the host 

device which are expecting to receive the 

GPS location information via a serial port must 

instead use a Virtual Serial Comm Port.
The data sent to the host device is formatted 

as prescribed in the National Marine 

Electronics Association 0183 V3.0 (NMEA-

0183) standard.  As such it supports the 

following sentences: GGA, GLL, GSA, GSV, 

RMC, and VTG.  
This handset is not a full NMEA-0183 

compliant device supporting electrical RS-

422/RS-232 connectivity as dictated by the 

NMEA-0183 standard.  Consequently it's 

unsuitable for conventional marine NMEA-

0183 equipment use.  Its intended use is for 

normal "terrestrial" mobile users who want to 

enable their USB hosting computing devices 

such as a PC, laptop or PDA with the phone's 

highly-capable GPS functionality.

get connected

1 Slide open the 

phone's bottom 

connector and 

insert a mini-

USB cable into 

the phone's bottom connector.

2 Insert the other end of the mini-USB cable 

into a vacant USB receptacle of your host 

device. A virtual USB Comm Port will be 

created on your host device upon 

successful enumeration of the phone as a