Motorola st7790 ユーザーガイド

 

13

 

Your phone’s batteries are shipped uncharged and fitted with 
protective covers. Before you install the batteries, remove 
these covers, and save them for storing unused batteries. 
The covers prevent metal objects from contacting the battery 
terminals, reducing the risk of injury or damage from a 
battery short circuit. (See ”Charging Batteries” on page 16 
when you’re ready to begin charging your battery.)

 

1. Press and hold the release latch.

2. Pull the battery upward, out of its 

cover.

 

1. Set the edge of the battery opposite 

the release latch into the cover.

2. Lower the release latch side of the 

battery into the cover until the latch 
clicks into place.

 

1. Hold the battery securely with one 

hand. 

2. With the thumb of your other hand, 

push the base of the cover upward. 

3. Continue pushing until the cover slides 

free of the pins on the bottom of the battery, and 
swing the cover away from the battery.

 

1. Slide the curved end of the cover 

onto the hook on top of the battery.

2. Push the cover firmly upward until the 

base of the cover slides past the 
battery pins; then release.

 

TDMA.book  Page 13  Thursday, October 29, 1998  9:52 AM