Motorola st7790 ユーザーガイド

ページ / 95
 
16
 
Charging Batteries
 
Using the Internal Charger
 
.
 
Tip: 
 
You can still place 
and answer calls 
while using either 
the rapid charger 
or the cigarette 
lighter adapter. 
Remember that 
talking on the 
phone requires 
energy, so 
charging will take 
more time. To 
place the phone in 
charger-only 
mode, press 
 
¡ 
 
once.
 
Your phone has a built-in battery charger. Using either the AC 
or cigarette lighter adapter, you can plug the handset directly 
into a power source to charge any attached batteries.
To charge:
1. Plug the AC adapter or 
cigarette lighter adapter 
into the accessory 
connector on the bottom of 
your phone as shown, with the release tab facing up.
2. Plug the power adapter into a 110V AC electrical 
outlet. A beep-tone sounds, and the battery icon 
flashes.
See ”Charge Times” on page 18 for charge times.
 
Using the Desktop Charger
 
You can use the desktop charger front pocket to charge 
batteries while they are attached to your phone, and the rear 
pocket to charge batteries separately.
 
Tip: 
 
If both a main and 
auxiliary battery 
are attached, the 
main battery is 
charged to 90% 
before the 
auxiliary is 
charged.
 
To charge:
1. Plug the AC adapter into the 
back of the charger, release 
tab facing up.
2. Plug the other end of the 
adapter into an AC wall socket.
3. With battery(ies) attached, place the phone into the 
charger’s front pocket.
4. You can insert an extra auxiliary or main battery into 
the rear pocket.
 
Note: 
 
The detachable plug assembly included with your 
package can only be used for this power supply. Do not plug 
it into any wall outlet without the power supply.
When the phone is charging, the battery level indicator will 
flash. When the battery is fully charged, this icon will stop 
flashing. If your phone cannot charge the battery, this 
indicator will not appear.
PUS
H
 
TDMA.book  Page 16  Thursday, October 29, 1998  9:52 AM