Marantz bd8002 ユーザーガイド

36

• Settings with (*) are the default.
• For HDMI, “None” and “Off” options for “Speaker Configuration” are not available.
• For “Delay Time”, the difference among the value of the each speaker cannot exceed 4.5m (15ft).

Channel Level
Tests or sets the 
volume for each 
speaker.

Test Tone:
“Test Tone” is the test 
tone which can be 
output from the 
speakers so that you 
can adjust the volume 
for each speaker.

Select “Off” to deactivate 
the “Test Tone” feature.
Select “Manual”, then 
press [ENTER] to manually 
set the volume for the 
desired speaker.
Select “Auto”,then press 
[ENTER] to automatically 
output the test tone from 
each speaker.

0 dB to -12 dB 
(0 dB*)

If you have selected 
“Manual” in “Test Tone”, 
select the desired speaker 
to set and adjust the 
volume for the selected 
speaker.
If you have selected 
“Auto” in “Test Tone”, test 
tone will be output 
automatically in order. 
Adjust the volume of the 
speaker that output the 
test tone.

0 dB to -12 dB 
(0 dB*)

0 dB to -12 dB 
(0 dB*)

0 dB to -12 dB 
(0 dB*)

0 dB to -12 dB 
(0 dB*)

0 dB to -12 dB 
(0 dB*)

0 dB to -12 dB 
(0 dB*)

0 dB to -12 dB 
(0 dB*)

SW + 10 dB
(Not available for HDMI)

On/Off*

Set “On” to increases the 
volume level that is output 
from the subwoofer by 10 
dB.

Delay Time
This is a parameter 
for optimizing the 
timing at which the 
sound is output from 
the speakers 
according to their 
distance from the 
listening position.

Set the desired measure 
system. This measure 
system will be used for 
“Delay Time” setting. Press 
[ENTER] to switch the 
setting.

0m - 18m (3.6m*)
(0ft - 60ft (12ft))

Select the distance from 
the listening point to the 
speaker to get the ideal 
delay time.

0m - 18m (3.6m*)
(0ft - 60ft (12ft))

Center

0m - 18m (3.6m*)
(0ft - 60ft (12ft))

0m - 18m (3.0m*)
(0ft - 60ft (10ft))

0m - 18m (3.0m*)
(0ft - 60ft (10ft))

0m - 18m (3.0m*)
(0ft - 60ft (10ft))

0m - 18m (3.0m*)
(0ft - 60ft (10ft))

0m - 18m (3.6m*)
(0ft - 60ft (12ft))

Select “Default”, then press 
[ENTER], to reset the 
“Delay Time” setting to the 
default.

E5J30ED_EN.book  Page 36  Wednesday, October 15, 2008  9:32 PM