Marantz AV8003 ユーザーガイド
CONNECTIONS
SETUP
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
REMOTE
CONTROLLER
71
ENGLISH
3. SYS.SETUP
Display the MAIN MENU on the LCD of the RC2001,
then press the button next to the “SYS.SETUP”
indicator.
The items below can be set in the SYS.SETUP
screen.
then press the button next to the “SYS.SETUP”
indicator.
The items below can be set in the SYS.SETUP
screen.
• CLOCK (Clock setting)
• BACK LIGHT (Backlight illumination time setting)
• LCD (LCD setting)
• BEEP (Beep sound setting)
• MEM CLEAR (Initialization setting)
CLOCK (Clock setting)
This sets the clock for the RC2001.
This sets the clock for the RC2001.
1.
Press the button next to the “CLOCK” indicator
in the SYS.SETUP menu screen in the LCD to
display the clock setting screen.
display the clock setting screen.
2.
Use the numeric buttons (0 to 9) and cursor
buttons (
t and u) to set the current time. After
setting the correct time, press the ENTER
button.
button.
3.
The message “COMPLETED” is displayed in
the LCD to indicate that the clock setting is
completed.
completed.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the SYS.SETUP menu.
to the SYS.SETUP menu.
• Pressing the Home button returns the LCD
to the MAIN MENU.
Notes:
The clock can become out of sync over time. Please
check it occasionally and set to the correct time if
necessary.
check it occasionally and set to the correct time if
necessary.
The clock setting is not backed up when the battery
pack is replaced. Please reset the time after replacing
the battery pack.
pack is replaced. Please reset the time after replacing
the battery pack.
BACK LIGHT (Backlight illumination time setting)
Press the LIGHT button on the RC2001 to turn on
the backlight, then set the time until the backlight
turns off.
Press the LIGHT button on the RC2001 to turn on
the backlight, then set the time until the backlight
turns off.
1.
Press the button next to the “BACKLIGHT”
indicator in the SYS.SETUP menu screen in
the LCD to display the backlight illumination
time setting screen.
the LCD to display the backlight illumination
time setting screen.
2.
Press the buttons (right: +, left: -) displayed next
to TIME to set the illumination time. The time
can be set in 1-second intervals from 0 to 60
seconds.
can be set in 1-second intervals from 0 to 60
seconds.
After deciding the settings, press the ENTER
button.
3.
The message “COMPLETED” is displayed on
the LCD to indicate that the illumination time
setting is completed.
setting is completed.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the SYS.SETUP menu.
to the SYS.SETUP menu.
• Pressing the Home button returns the LCD
to the MAIN MENU.
Note:
Setting the BACK LIGHT TIMER to 0 sec is
equivalent to turning off the backlight so that the
backlight does not turn on even when the LIGHT
button is pressed.
equivalent to turning off the backlight so that the
backlight does not turn on even when the LIGHT
button is pressed.
AV8003N.indb 71
AV8003N.indb 71
08.4.28 10:49:39 AM
08.4.28 10:49:39 AM