Marantz dv3002 ユーザーズマニュアル

This player outputs video in a number 
of different ways. Choose the one most 
suit able for your system using the guide 
below.

SCART and S-Video cables will only plug in 
one way, so make sure the plug is correctly 
lined up with the jack before inserting. Be 
sure to fully insert for a good con nec tion.

•    The A/V EURO CONNECTOR can output 

com pos ite or RGB component video. If you 
connect just one TV, use the A/V EURO 
CONNECTOR. You can select the type of video 
output by changing the COMPONENT setting in 
the DVD Setup Menu (page 41).

S-Video should give a better picture, so if 
you have an S-Video input, use it. S-Video 
cables are available from any good audio/
visual dealer.

With an HDMI cable, both uncompressed 
video data and digital audio data (e.g., 
LPCM or bit stream data such as Dolby 
Digital, DTS, or MPEG data) can be 
trans mit ted with just a single connector.

By transmitting DVD image data directly as 
digital data without it being fi rst converted 
into analog format, it becomes possible to 
provide the very fi nest in image quality (see 
pages 36, 39-41).

•    The HDMI output of this unit can be con nect ed 

to a DVI jack on a TV or other device using a 
conversion adapter. In this case, it is necessary 
to use a TV or display with an HDCP-com pat i ble 
DVI input. 

•    There may be no image output if con nect ed to 

a TV or display that is not com pat i ble with the 
above format.

•    Refer to the instruction manual of the TV or 

display to be connected to this unit for detailed 
information regarding the HDMI terminal.

•    When connecting a progressive input TV with the 

component output of the player, select ON in 
the Progressive setting (see page 38).

If your TV has a component video input, we 
rec om mend using it to connect directly to the 
COM PO NENT VIDEO OUT of this player. Use 
the standard 3-jack component video output.

If a component input is not 
available to you, connect this 
player to your TV or AV receiver 
using either the VIDEO or S1 
jacks.

Plug into a standard 
AC wall outlet.

If your TV and projector have 
a HDMI terminal for Video and 
Audio Input, we recommend 
using it to connect directly to 
the HDMI out of this player. 

If your TV has a SCART input, we 
rec om mend using it to connect directly 
to the A/V EURO CONNECTOR on 
this player. (for Europe only)

•    Before making or changing any rear panel 

connections, make sure that all components are 
switched off and unplugged from the wall outlet.

•    While a connected component is turned on, 

do not unplug the power cord of this DVD 
player from the wall outlet. The speaker may be 
dam aged.