Marantz ud5005 ユーザーガイド
34
ENGLISH
General Setting
Settings for system, language, parental lock, network, etc. can be made.
System Setup
Default settings are underlined.
Setting items
Setting details
Screen Saver
Sets the screensaver.
Sets the screensaver.
On : The screensaver function activates when stop or pause status
continues for about three minutes. The screensaver function also activates
during playback of a CD, Super Audio CD or audio fi le when no operations
are performed for about three minutes.
Off : Does not use the screensaver.
continues for about three minutes. The screensaver function also activates
during playback of a CD, Super Audio CD or audio fi le when no operations
are performed for about three minutes.
Off : Does not use the screensaver.
Auto Power Mode
This setting automatically
sets the power to standby.
This setting automatically
sets the power to standby.
On : This setting automatically sets the power to standby if any of the
following states continues for approximately 30 minutes.
• Disc not loaded
• Playback stopped
• Stopped due to the resume function
Off : Does not use the auto power mode.
following states continues for approximately 30 minutes.
• Disc not loaded
• Playback stopped
• Stopped due to the resume function
Off : Does not use the auto power mode.
Power Saving
Sets to power saving mode
during standby.
Sets to power saving mode
during standby.
Power Saving Standby : This is the lowest power consumption mode.
During standby, operations are not accepted via HDMI control.
Normal Standby : During standby, operations are accepted via HDMI
control. Power consumption is slightly higher at this time.
During standby, operations are not accepted via HDMI control.
Normal Standby : During standby, operations are accepted via HDMI
control. Power consumption is slightly higher at this time.
HDMI Control
Links the unit and a device
connected with an HDMI
cable that supports HDMI
control.
Links the unit and a device
connected with an HDMI
cable that supports HDMI
control.
• On : Links with the device connected to HDMI.
• Off : Disables the HDMI control function.
• Off : Disables the HDMI control function.
• For the HDMI control function to operate, it is necessary for the unit or
HDMI-compatible TV connected to the unit to have an HDMI connection.
• Refer to “HDMI control functions” (vpage 21) for more information on
HDMI control functions.
• After the “HDMI Control” setting has been changed, always turn off the
power to the connected equipment and then turn it back on.
HDMI Power Off Control
Links the power of the unit
and a device connected with
an HDMI cable that supports
HDMI control.
Links the power of the unit
and a device connected with
an HDMI cable that supports
HDMI control.
• On : Turns the unit’s power to standby through linkage to the TV.
• Off : Does not turn the unit’s power to standby through linkage to the TV.
• Off : Does not turn the unit’s power to standby through linkage to the TV.
Initialize
All settings including audio
mode and picture quality are
set to default settings.
All settings including audio
mode and picture quality are
set to default settings.
Cancel : Does not initialize.
OK : Executes initialization.
OK : Executes initialization.
Setting items
Setting details
Firmware Update
Updates the fi rmware of the
unit via the Internet.
Updates the fi rmware of the
unit via the Internet.
Check for Update : Checks if a newer version of fi rmware exists. You
can also check approximately how long it will take to complete an update.
If the fi rmware is already updated to the latest version, the fi rmware
updating operation starts after you press
can also check approximately how long it will take to complete an update.
If the fi rmware is already updated to the latest version, the fi rmware
updating operation starts after you press
ENTER
.
When updating starts, the power indicator lights red and the GUI screen
shuts down.
While updating, a rough estimate of remaining time is indicated on the
display.
When updating is complete the power indicator lights green and the
normal status is resumed.
shuts down.
While updating, a rough estimate of remaining time is indicated on the
display.
When updating is complete the power indicator lights green and the
normal status is resumed.
Update
Notifi cation
Displays the message for
updating on a television
screen just after the power
is turned on.
updating on a television
screen just after the power
is turned on.
On : The message for updating is displayed on a television screen.
Off : The message for updating is not displayed on a television screen.
Off : The message for updating is not displayed on a television screen.
BD Data Utility
Initializes the BD data stored
in the built-in memory or
external memory used for
BD-Live.
Initializes the BD data stored
in the built-in memory or
external memory used for
BD-Live.
BD Data Information
The BD data used for BD-Live are initialized.
The space remaining in the memory being used is displayed.
The BD data used for BD-Live are initialized.
The space remaining in the memory being used is displayed.
FMT BD Data : Initializes the space for BD data being used for BD-Live.
This operation deletes all data. When a USB memory device that
stores the data is inserted, never execute this operation.
BD-Live Memory
Built-in memory or external memory is selected for the BD-Live memory.
Built-in memory or external memory is selected for the BD-Live memory.
Internal : The built-in memory is used.
External : The USB memory device inserted in the unit is used.
External : The USB memory device inserted in the unit is used.
If the capacity of BD-Live is more than 1 GB, select the external
memory in advance (vpage 15).
Remote control operation
buttons
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
(Up/Down/Left/Right)
Decision the setting
Return to previous menu
1.UD5005U_ENG_0716.indd 34
2010/07/20 16:50:49