Marantz ud9004 ユーザーガイド
Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Setup
Getting Started
Specifications
17
ENGLISH
Connection to an AV Amp with No HDMI Audio Input
When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the UD9004
outputs Dolby Digital or DTS bitstream from its digital audio output terminal.
outputs Dolby Digital or DTS bitstream from its digital audio output terminal.
AUDIO
COAXIAL
IN
IN
OPTICAL
AV Amp
NOTE
Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with
•
this connection.
When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do
so with an HDMI connection (vpage 13, “Using an HDMI Cable to Connect
to an AV Amp or Television”).
Super Audio CD’s DSD signal cannot be output. Also, during CD layer
When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do
so with an HDMI connection (vpage 13, “Using an HDMI Cable to Connect
to an AV Amp or Television”).
Super Audio CD’s DSD signal cannot be output. Also, during CD layer
•
playback, 44.1 kHz/16-bit Linear PCM is output.
Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVD
Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVD
•
disc with recorded DTS content can generate noise and even damage your speakers.
When connecting with an optical transmission cable (sold separately), make sure the plug shape
When connecting with an optical transmission cable (sold separately), make sure the plug shape
•
aligns with the socket, and insert fully.
Match the
shapes
shapes
1. Home Theater Playback – Playing Back Using Multi-channel System –
Audio Signal from the Digital Audio Output (Optical/Coaxial) Terminal
The UD9004 can convert and output digital audio signal format recorded on media.
Convert the digital audio signal in accordance with the specifications of the device that is to input digital
audio output signals from the UD9004.
Convert the digital audio signal in accordance with the specifications of the device that is to input digital
audio output signals from the UD9004.
Media/Files
Audio format
Setting “Audio Setup” – “Digital Out” (vpage 29) on
the GUI menu
Bitstream
PCM/PCM Down Sampling
BD
Dolby Digital
Dolby Digitalz1
2 ch Downmix LPCM
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby TrueHD
DTS
DTSz1
DTS-HD
LPCM
LPCM
2 ch Downmix LPCMz1
AVCHD
Dolby Digital
Dolby Digital
LPCM
2 ch Downmix LPCM
DVD-Video
Dolby Digital
Dolby Digital
DTS
DTS
LPCM, MPEG
2 ch Downmix LPCM
DVD-Audio
LPCM, PPCM
Super Audio CD
Multi area
Audio is not output
Stereo area
CD layer
CD layer
2 ch LPCM
DivX®
Dolby Digital
Dolby Digital
2 ch Downmix LPCM
MP3, MP2
2 ch LPCM
CD
MP3, WMA, AAC, LPCM
MP3, WMA, AAC, LPCM
DTS-CD
DTS
2 ch Downmix LPCM
(DTSz2)
(DTSz2)
z
1 :Bitstream signals are output in accordance with the BD re-encode setting when “BD Audio Mode”
is set to “Mix Audio Output” (vpage 33).
z
2 :When “HDMI Setup” – ”Audio Setup” is set to “Auto” on the GUI menu and bit stream is output from
HDMI , the DTS bit stream is output from the digital audio output (optical/coaxial) as well.
For content with copyright protection, audio signal is down sampled to 48kHz 16bit and is output.
Connections