Marantz ud9004 ユーザーガイド

21

ENGLISH

You can update by downloading the latest firmware from the Internet. 

• 

For more information, on the GUI menu, select “Other Setup” – “Firmware Update” (vpage 33). 
See “Network Setup” (

• 

v

page 31) on the GUI menu for more information on network setting. 

n

n

Device that connects to the broadband circuit and conducts communications on the Internet. 
A type that is integrated with a router is also available.

n

When using the UD9004, we recommend a router with the following features.  

Built-in DHCP (Dynamic Host Configuration Protocol) server.

• 

Function that automatically assigns an IP address on the LAN. 
Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)

• 

n

An Ethernet cable is not included with the UD9004.

• 

For Ethernet cable, we recommend you use shielded straight cable (normal type). 

• 

If you use the flat type or a non-shielded cable, the noise may adversely affect other devices. 

For Internet connection, use an ISP (Internet Service Provider). Ask your local dealer for details. 

•  It  is  necessary  to  subscribe  to  an  ISP  in  order  to  connect  to  the  Internet.  If  you  already  have  a 

broadband connection, there is no need to subscribe anew.

• The router you can use varies with the ISP. For more information, contact your ISP or PC dealer. 
•  MARANTZ assumes no responsibility whatsoever for any communication errors or troubles resulting 

from customer's network environment or connected devices.

n

The UD9004 can use the DHCP function to automatically set the network.

• 

With the type of circuit in which network setting is performed manually, when subscribed to a provider, 

• 

conduct the setting in accordance with “Network Setup” on the GUI menu (vpage 31). 
If you connect the UD9004 to a network without a DHCP function, conduct IP address and other settings 

• 

according to “Network Setup” on the GUI menu (vpage 31).
The UD9004 does not support PPPoE. If you subscribe to a circuit that is set with PPPoE, a PPPoE-

• 

compatible router is required. 
When setting manually, check the setting contents with the network administrator.

•