AGA companion 60rda ユーザーズマニュアル

All specifications and product design subject to change without notice. 

Such revisions do not entitle the buyer to corresponding changes, improvements, 

additions, replacements or compensation for previously purchased products.

3

The proper location will ensure peak performance of
your drawer refrigerator. Choose a location away from
heat and out of direct sunlight. Best performance will be
maintained when installed within the following
parameters:

Ventilation is required for the bottom front section of the
unit where the grille is located. Keep this area open and
clear of any obstructions. Adjacent cabinets and countertop
can be installed on top, back and sides of the unit as long as
grille and drawer access remain unobstructed. An opening
of 24" is required between cabinets with a depth of 24”. 

Adjacent cabinets and countertop can be installed on top,
back and sides of the unit as long as the grille and drawer
access remain unobstructed. Ventilation is required for the
bottom front section of the unit where the grille is located.
Keep this area open and clear of any obstructions.

Make certain that the leveling legs supplied with the
drawer refrigerator are installed according to the
instructions. Leveling adjustments can be made by raising
or lowering the glides on the bottom of the unit.

15.13

15.13

21.86

24.03

27.22

23.88

34

built-in
freestanding

55-80°F
55-90°F

* Drawer Refrigerator will not perform correctly in ambient temperatures less than 55°F.

DISCONNECT POWER SOURCE BEFORE ADJUSTING

LEVELING LEGS