Nokia 6210 接続ガイド
Nokia 6210
12.10.00
Copyright
ã 2000. Nokia
.
All rights reserved.
1(3)
A Quick Guide to Using the Nokia 6210 with an Infrared data connection in
a PocketPC device
SETTING UP A NEW CONNECTION
1. Go to the Start menu and select Settings
2. Select Modem
3. You should now have a list of available connections; just click on the New Connection… option.
4. Now complete the settings as shown in the figures below:
3. You should now have a list of available connections; just click on the New Connection… option.
4. Now complete the settings as shown in the figures below:
Figure 1. Select a modem and
Figure 2. Check Connection
Figure 3. Type in the ISP's phone
check the Baud Rate. After that
preferences. Especially that
number and then tap Next.
tap Advanced…NOTE! When using the Flow Control selected is Software. Tap OK
HSCSD Baud Rate should be set
on upper right corner and then tap
higher.
Next
Figure 4. Uncheck the Wait for
Figure 5. Now go to Dialing leaflet Figure 6. In some cases you may need
Dial tone before dialing check box and go to Dialing Patterns…
to edit these to get the phone number
and tap Finish. *
right when dialing.