Marantz pd5040d ユーザーズマニュアル

22

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.

Example: Setting “AUDIO INPUT1” to “VIDEO 2”

1. On the MAIN MENU, select “AUDIO”, then press the

MENU/ENTER button.
The “AUDIO” screen appears.

2. Use the ▲ and ▼ buttons to select “AUDIO INPUT1”.

3. To set the AUDIO INPUT1 to “VIDEO2”...

Use the 

 and 

 buttons to select “VIDEO2”.

The mode switches as follows each time the 

 or 

button is pressed:
The available sources depend on the setting of “BNC
INPUT”.

RGB:

COMP.:

A single audio input cannot be selected as the audio
channel for more than one input terminal.

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

→

 

 ↔ 

 

 ↔ 

 

↔ 

←

 

→

 ↔

  ↔

 

 

←

→

 

 ↔ 

 

 ↔ 

 

↔ 

←

 

→

 ↔

  ↔

 

 

←

The position of the image can be adjusted and flickering
of the image can be corrected.

Example: Adjusting the vertical position in the normal
mode

1. On the MAIN MENU, select “IMAGE ADJUST”, then

press the MENU/ENTER button.
The “IMAGE ADJUST” menu appears.

Default settings (when RGB/PC is selected)

* The settings on the IMAGE ADJUST menu are not

preset at the factory.

To select a mode ...
Use the 

 and 

 buttons to select a mode.

The mode switches as follows each time the 

 or 

button is pressed:

↔

* The mode can also be switched by pressing the “WIDE”

button on the remote control.

2. To adjust the vertical position ...

Use the ▲ and ▼ buttons to select “V-POSITION”.

3. Adjust using the 

 and 

 buttons.

* If neither the 

 or 

 button is pressed within 5 seconds,

the current setting is set and the previous screen
reappears.

To continue making other computer image
adjustments ...
Repeat from step 2.